JINYU GN-1000RD2 425 L Flat Glass Cake Display

GN-1000RD2 measures 1000 mm wide, 730 mm deep and 1200 mm high. Plot all three dimensions on the proposed display position and measure the route into the premises. The two sliding doors are on the service side, so include staff movement and the packing surface behind the cabinet in the drawing. Send that layout with the GN-1000RD2 model number when discussing placement; the drawing should show the neighboring counter, walls and customer handover point.

The listed capacity is 425 L, and the display has two glass shelves. Start your arrangement with the outside dimensions of the cake boards, plates or trays used in service. Draw the planned assortment and identify which items staff will retrieve most often through the service-side sliding doors. Include those product dimensions in your inquiry so the conversation addresses the cakes you actually sell rather than treating the litre figure as a cake count.

GN-1000RD2 lists a 220-240 V / 50 Hz supply and 450 W rated power. Its cooling specification names fan cooling and R290 refrigerant, with a listed 2-8 °C range. Record the installation country and available supply in the equipment brief, using the complete model number. If you are comparing the two RD2 widths, both have the same listed electrical values; their cabinet width and capacity are the differences shown in the comparison table.

Compare the 1000 mm width and 425 L capacity of GN-1000RD2 with the 1200 mm width and 515 L capacity of GN-1200RD2. The smaller cabinet uses 200 mm less frontage, while both models are 730 mm deep and 1200 mm high. Choose against a measured counter layout and the dimensions of your cakes and serving dishes. Both models retain two glass shelves, two sliding service-side doors and the listed 2-8 °C temperature range.