Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU model GN-1000RD3

JINYU GN-1000RD3 1000 mm Flat Glass Cake Display

GN-1000RD3 places three glass shelves inside a 1000 mm wide freestanding cabinet. Its flat glass front, sides and top frame a 535 L display, with two sliding doors on the service side.

JINYU GN-1000RD3 flat glass cake display in a tea lounge

GN-1000RD3 specifications

Overall dimensions (W × D × H)1000 × 730 × 1300 mm
Capacity535 L
Temperature range2-8°C
Rated power450 W
Voltage / frequency220-240V/50Hz
Doors2 sliding doors on the service side
GlassFlat glass front, sides and top
Shelves3 glass shelves
CoolingFan Cooling
RefrigerantR290 (Propane)
InstallationFreestanding
Overall dimensions (W × D × H), cm100.0 × 73.0 × 130.0 cm
Overall dimensions (W × D × H), inches39.4 × 28.7 × 51.2 inches

Centimetre and inch equivalents are calculated from the listed millimetre dimensions and rounded to one decimal place.

Compare display fridge sizes and cabinet dimensions →

The cabinet measures 1000 × 730 × 1300 mm. Compared with GN-1200RD3, it uses 200 mm less frontage while retaining the same outside depth and height. Draw the 1000 × 730 mm body on the floor plan and identify the staff side before positioning adjacent counters.

The recorded capacity is 535 L, compared with 650 L for GN-1200RD3. Both models have three glass shelves. That volume difference does not establish a cake count: send the diameters and heights of your actual stands and request shelf dimensions and opening measurements for the proposed arrangement.

Fan cooling, R290 refrigerant and a listed 2-8°C temperature range describe the cooling configuration. Rated power is 450 W and the recorded supply is 220-240V/50Hz. Put the exact model code on the electrical schedule and keep the configuration documents with the layout.

The photographs show a dessert-service arrangement and an empty shelf view. Cakes, plates and presentation accessories illustrate use. Request the supplied-item list, installation drawing and packed dimensions for the order so display planning and delivery planning use their respective measurements.

Where the GN-1000RD3 fits

  • Tea lounge dessert station. Compare a 1000 mm cabinet frontage with the serving counter and retain access to both service-side sliding doors.
  • Bakery with a shorter equipment run. Compare GN-1000RD3 with the 1200 mm RD3 model using the same 730 mm body depth.
  • Cafe cake assortment review. Send the tray and cake-stand sizes for a three-shelf arrangement rather than deriving cake counts from 535 L.

GN-1000RD3 questions

How does GN-1000RD3 compare with GN-1200RD3?

GN-1000RD3 measures 1000 × 730 × 1300 mm and has a recorded capacity of 535 L. GN-1200RD3 measures 1200 × 730 × 1300 mm and is listed at 650 L. The larger model adds 200 mm of width and 115 L of recorded capacity. Both have three glass shelves, flat front, side and top glass, and two service-side sliding doors. Compare the internal shelf drawings separately when planning cake stands and trays.

Does the 535 L figure specify the number of cakes?

The 535 L figure is the recorded cabinet capacity. It does not identify usable shelf width, tray depth, loading-opening size or cake-stand diameter. GN-1000RD3 has three glass shelves. List the stands, decorated cake heights and serving trays you intend to use, then request the internal dimensions for that configuration. Review removal through the service-side doors as well as the arrangement of products on each shelf.

What electrical and cooling data are recorded?

GN-1000RD3 is recorded at 220-240V/50Hz with rated power of 450 W. The cooling configuration uses fan cooling and R290 refrigerant, with a listed temperature range of 2-8°C. Keep these values attached to the full model reference in the inquiry. Rated power describes the appliance rating and does not give daily electricity consumption. Send the site supply details with the proposed location when requesting configuration and installation documents.

Which measurements belong in the delivery and installation brief?

Start with the 1000 × 730 × 1300 mm cabinet dimensions and mark the staff loading side on the site plan. Request packed dimensions and handling information for the transport route; cabinet dimensions alone do not describe the shipping package. For the final position, request the installation drawing, connection locations and required access space. Attach route measurements, doorway photographs and the intended display arrangement so the reply refers to the GN-1000RD3 project.

Let's plan your equipment

Request a configuration & shipping review

Tell us your model, electrical supply and destination. We will review suitability and delivery terms before a quotation. No price, minimum order or delivery date is implied.

A successful submission will show a receipt reference.

Prefer direct contact? [email protected] · WhatsApp. Include the reference shown if submission is unconfirmed.