Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

Can all commercial equipment be combined in a modular cooking system?

Not automatically. A kitchen plan can bring different appliances into one cooking line. Physical connections between them depend on the assembly details documented for the selected models. Begin with the menu and work at each position. Identify where a continuous worktop or shared base would help, and where a freestanding or countertop appliance suits the task.

Compare the drawings for each proposed connection. Note the body depths, finished working levels, supports and any joining parts listed for that combination. Similar widths or the same energy source do not establish a fit. When retaining an existing appliance, send its model reference and a photograph of the side that will face the new unit. These details let the reply address the gap, edge alignment and support arrangement at that position.

For a countertop example, JY-TSPT-5D is an induction soup cooker rated at 5 kW and 220 V. Its body measures 400 x 500 x 200 mm. Show the supporting counter separately and add its height to the 200 mm appliance height when comparing working levels. Include the intended pot diameter and handle positions in the layout. This model uses magnetic flat-bottom cookware, which is not included.

JY-DTZL-15 is a floor-standing single pot induction steamer with a 700 x 800 x 1250 mm body. The worktop is 800 mm high, while the overall height includes the backsplash. It is rated at 15 kW and 380 V. The two linked induction models therefore have different depths, supports and electrical requirements. Their model records do not document a joining kit or a shared base. Use them as separate station references when planning the cooking line.

Use the inquiry form to send the model links and a numbered kitchen plan. Mark the proposed connections and the equipment that will remain in place. List the utilities available at each position and show how staff reach the controls and service connections. For a physically joined run, request the offered assembly drawing and the corresponding joining parts. If that arrangement is unavailable, compare an independent station or another model against the same cooking task and space.

Prepare this information

  • Cooking task and model reference at each numbered position
  • Proposed joints, base arrangements and finished worktop heights
  • Body depths, cookware positions and service access
  • Individual utility requirements and offered assembly drawings

Compare countertop cooker and floor-standing steamer records

Matching model records

Discuss your site and product arrangement

Send your equipment brief