Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

Can induction help support sustainability goals?

Induction can support a kitchen electrification project by replacing gas combustion at a cooking station with electricity. Whether that change reduces greenhouse gas emissions depends on the gas displaced, the electricity consumed and how the electricity is generated. Define the goal before choosing equipment: removing gas use at one station, reducing energy per meal and lowering operating emissions are different results to measure.

Start with a baseline for the station being replaced. Record the recipes, portions, batch sizes and service hours alongside gas consumption. Repeat the same cooking work on the proposed induction station and meter its electricity use in kWh, including gaps between orders. Keep the cookware, starting temperature and finished-food endpoint in the trial record. Compare energy per completed batch or portion so a quieter service does not appear to be an equipment saving.

For an operating-emissions comparison, multiply the measured fuel and electricity quantities by the relevant emissions factors, using matching units and a stated reporting period. Keep direct gas-combustion emissions separate from emissions associated with purchased electricity. The EPA describes these as Scope 1 and Scope 2 respectively. Record the source and year of each factor; a lower gas bill alone does not establish lower total operating emissions. This station comparison does not measure the emissions from making or transporting the equipment.

JY-TSPT-5D provides one flat cooking surface rated at 5 kW and 220 V in a 400 x 500 x 200 mm body. It uses magnetic flat-bottom cookware, which is not included. JY-TSPA5+5 combines one flat zone and one concave wok zone, rated at 5 kW each, for 10 kW total at 220 V. Its body measures 850 x 500 x 200 mm. Use these ratings for the equipment and electrical schedule. Metered energy depends on the cooking task and operating time; neither model record supplies a measured carbon reduction.

Send the existing station's fuel readings, intended menu, cookware dimensions and available electrical supply through the inquiry entry with the selected model. Request a trial of the actual batches and retain the readings with the equipment proposal. If the project also targets ventilation or cooling energy, measure those loads separately during comparable service periods. Report the cooker result and any building-system changes as separate items so the project record shows where each saving came from.

Prepare this information

  • Defined electrification, energy or operating-emissions goal
  • Baseline gas consumption, recipes, portions and service hours
  • Induction kWh readings for matched batches and idle periods
  • Emissions-factor source, year, units and reporting period
  • Selected model, cookware dimensions and available electrical supply

Compare flat and wok induction cooking stations

Matching model records

Discuss your site and product arrangement

Send your equipment brief