JINYU · Buyer question
Can you assist with choosing the right model for my space for commercial kitchen equipment?
A measured sketch is a useful starting point for choosing a model for your space. Send it with your equipment inquiry and describe what you want to display, how much you expect to hold and where staff or customers will stand. Include the sizes of bottles, cake boards or serving dishes. Mark the cabinet position and the side you need to load or serve from. These details help narrow the choice before you work through installation and delivery arrangements.
For a display on an existing counter, consider GN-900CT. The cabinet measures 900 mm wide, 530 mm deep and 730 mm high, with two chrome-plated shelves and two rear sliding doors. Draw the staff position behind the counter and add the counter height to the cabinet height when planning the display. GN-1000R2F offers a freestanding cake display with three glass shelves. It measures 1000 mm wide, 740 mm deep and 1385 mm high. Its two front glass doors open outward, so show their movement and the serving position beside nearby counters and walkways.
If you need a drinks cabinet, compare GN-620FS with the space beside your shop shelving. This upright beverage cooler is 620 mm wide, 700 mm deep and 2018 mm high. Four wire shelves hold the display behind a hinged glass door. Allow for reaching in to select a drink and for staff to restock it. Product requirements also matter when making your shortlist. The listed temperature range is 0-10 degrees C for GN-620FS and 2-8 degrees C for both cake displays. Compare these specifications with the storage requirements of your assortment.
Measure the route into the premises as well as the final position. Note clear doorway widths and heights, corridor turns, steps and any lift openings and interior dimensions. Photograph the tight sections. Request packed dimensions, handling weight and movement instructions for the unit being offered, then discuss where it would be unpacked or lifted. The cabinet measurements above describe the equipment itself. They do not tell you the size of its shipping package or how it will pass around a turn.
Leave space on the drawing for walls, overhead shelving, nearby equipment and the routes people use during service. Ask for the selected model's ventilation and service clearances, plus the space needed to open its doors. For GN-900CT, request the installed weight and support requirements so you can compare them with your counter. All three models list a 220-240V/50Hz supply. Mark your socket position and available supply, and request the connection details for the offered configuration. Ask whether that configuration needs drainage and show existing drains where relevant.
Use the model links below to review your shortlist, then send the drawing and photographs through the equipment inquiry. State the measurement units, quantity and destination. Request an installation drawing that identifies the model, clearances, door travel and utility connections. Keep the chosen layout with the equipment brief so the receiving team and installer can work from the same dimensions.
Prepare this information
- List the products, container or serving-dish sizes and quantity you want on display.
- Draw the available width, depth and height, with the cabinet position and serving side marked.
- Include counter height and rear staff access when considering GN-900CT.
- Show room for GN-1000R2F's front doors to open beside counters and walkways.
- Compare GN-620FS's full height and hinged-door access with the drinks display position.
- Match the listed temperature range to your products' storage requirements.
- Measure delivery doorways, turns, steps and lifts, and photograph tight sections.
- Ask for packed dimensions, handling instructions and model-specific installation clearances.
- Request counter support details where relevant, and identify the electrical supply, socket and any drains.
- Send the sketch, photographs, shortlisted models, quantity and destination with your inquiry.
Compare cake displays and beverage coolers for your layout