Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

Does induction change kitchen design requirements?

Yes. Changing a cooking station to induction changes the equipment and utility information on the kitchen drawings. Start by marking the stations being replaced on the existing plan. Keep preparation, cooking and plating positions visible so you can compare how food moves before and after the change. For a new kitchen, place each proposed cooker against its menu task and cookware. The useful design output is a coordinated counter plan and equipment schedule, rather than an outline labelled only as an induction cooking line.

Revise the appliance outlines using the selected models. JY-TSPT-5D has a single flat cooking surface in a 400 x 500 x 200 mm body. JY-TSPA5+5 combines one flat zone and one concave wok zone in an 850 x 500 x 200 mm body. These dimensions describe the appliances. Draw the pot or wok and its handles separately, along with a place to set down hot cookware. Check whether the operator can reach the controls and move a full pot without crossing the next cook's working position. A change in cooker width can also move the neighbouring preparation or plating space.

Replace the old station's utility note with the offered unit's electrical details. JY-TSPT-5D is rated at 5 kW and 220 V. JY-TSPA5+5 has two zones rated at 5 kW each, giving 10 kW total at 220 V. List the number of each model and the appliances expected to operate together for the electrical designer. Rated power describes the equipment load; it does not state energy use during a service period. Obtain the connection and installation documents for the offered units so the designer can place the connections and assess the available supply. The catalogue voltage alone does not specify a circuit, cable or connection method.

Revisit ventilation, cookware storage and access on the same drawing. Induction heats compatible cookware through a magnetic field, so changing the heat source changes the appliance information used in the ventilation review. Cooking food still releases heat, steam and grease according to the menu and method. Have the ventilation designer assess the proposed cooking tasks and equipment rather than treating induction as permission to remove extraction. Use the offered unit's installation documents to mark cleaning and service access. JY-TSPT-5D uses magnetic flat-bottom cookware, which is not included. Check the intended pans and woks against the selected cooking surfaces, then give those items storage and handling space beside the station.

For a replacement project, mark each change on a copy of the existing layout. Show the new appliance outline, cookware landing area, electrical connection position and any changes to ventilation or adjacent counters. Label the model and drawing revision on both the equipment schedule and counter plan so a later model substitution reaches both documents. Send these drawings through the inquiry entry with your menu, pot and wok dimensions, available electrical supply and selected model links. A photograph of the existing station helps explain doors, shelves or fixed services that a plan view misses.

Prepare this information

  • Existing and proposed station positions with preparation and plating routes
  • Selected model outlines, cookware handles and hot-pot landing space
  • Model quantities, rated power, site supply and offered-unit connection documents
  • Menu-based ventilation review, cookware storage and documented service access
  • Matching drawing revisions, station photographs and pot or wok dimensions

Compare cooker dimensions and flat or wok cooking arrangements

Matching model records

Discuss your site and product arrangement

Send your equipment brief