Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

Does induction require special cookware?

Yes. Commercial induction needs cookware with a magnetic base that suits the cooking surface. A pot already used on gas may still be suitable, but its material and base shape need checking. For JY-TSPT-5D, the model record specifies magnetic flat-bottom cookware. Start with the pots you intend to use and match them to the proposed cooker before deciding which vessels to replace.

For a flat cooking surface, record the diameter of the base that rests on the cooker as well as the overall pot diameter. Photograph the underside and note any induction compatibility marking. Include the pot height, handle positions and usual food load in the brief. These details let the equipment discussion address the actual vessel. The published JY-TSPT-5D record does not give a minimum or maximum supported pot diameter, so ask for that range for the selected model.

JY-TSPT-5D has one flat cooking surface, rated at 5 kW and 220 V. Its countertop body measures 400 x 500 x 200 mm. Cookware is not included. Put the cooker outline and the intended pot on the same counter drawing, with handles in their working positions. Keep the pot purchase as a separate line in the equipment schedule so the cooker quotation and cookware sourcing cover the same vessel.

For a station with both a pot and a wok, compare JY-TSPA5+5. It has one flat zone and one concave wok zone, each rated at 5 kW. The total rating is 10 kW, the listed supply is 220 V, and the body measures 850 x 500 x 200 mm. Draw the pot over the flat zone and the wok over the concave zone. The model record gives no supported wok curvature, so attach the intended wok profile and dimensions to the fit inquiry. Ask whether compatible cookware is included, available separately or needs separate sourcing.

For an existing cookware set, send a short list that pairs each vessel with its intended cooking zone. Attach base photographs, dimensions and the dish or batch prepared in it. Use the linked model pages to identify JY-TSPT-5D or JY-TSPA5+5 in the inquiry. Request the supported vessel dimensions and, if available, a demonstration with the proposed pot or wok. This gives you a basis for keeping compatible cookware and sourcing the remaining pieces.

Prepare this information

  • Cooker model and assigned flat or concave cooking zone
  • Pot base diameter, overall diameter, height and handle positions
  • Base photographs, material details and any induction compatibility marking
  • Wok profile and dimensions for the concave zone
  • Food load, cookware inclusion and supported vessel dimensions

Compare flat and wok induction models

Matching model records

Discuss your site and product arrangement

Send your equipment brief