JINYU · Buyer question
Does the unit include an auto-defrost feature for commercial kitchen equipment?
GN-1500LG lists automatic defrost in its current model record. For GN-900RT, the record does not state a defrost method. The answer therefore depends on the model and configuration offered. When comparing cabinets, put the defrost method beside each model code. A fan-cooled cabinet or a digital controller does not, by itself, establish how defrost works.
The GN-1500LG open-front deli chiller lists 350 L capacity, fan cooling and automatic defrost. Its body measures 1500 x 740 x 1350 mm, width x depth x height. The recorded temperature range is 2-8 degrees C, with rated power of 1080 W at 220-240V/50Hz. Use these details to identify the listed configuration. Cycle timing, the way a cycle ends and recovery time are not specified in that record. Request the operating documentation for the version offered.
GN-900RT is a 140 L countertop cake display with recorded dimensions of 900 x 530 x 730 mm, width x depth x height. It lists fan cooling, digital temperature control and a 2-8 degrees C range. Its front glass has electric heating film for defogging. Heating the viewing glass addresses condensation there; it does not identify the method used to remove frost from the evaporator. Ask which defrost method the offered GN-900RT uses, rather than reading the glass-heating entry as an automatic-defrost specification.
Request the controller reference and its operating instructions with the cabinet model code. Ask what starts a defrost cycle, what ends it and which indication staff will see on the display. Where timing is specified, request the interval and duration for that configuration. If the controller allows an operator to start a cycle, ask for the documented procedure and how normal cooling resumes. This gives staff instructions for the installed controller without assuming that two cabinets use the same settings.
Describe the products you plan to display and when staff will replenish them. To assess the effect of defrost during service, request any available temperature observations through a cycle and the return to cooling. Ask where each reading was taken, what load was in the cabinet and the surrounding conditions. A controller reading and a product measurement answer different questions. The listed 2-8 degrees C range supplies no cycle-by-cycle temperature record, so compare the supplied observations with the requirements of your assortment.
Include water handling in the installation discussion. Ask for a drawing or description of the defrost-water route, any collection tray and any required drain connection. Neither linked model record establishes those details. Send the model codes, quantities, destination and layout through the inquiry entry below. Request a reply for each order line that states the defrost method and identifies the applicable controller instructions, cycle information and water arrangement.
Prepare this information
- Model codes and offered configurations identified on each order line
- GN-1500LG automatic defrost matched to the listed configuration
- Defrost method requested for the offered GN-900RT
- Front-glass heating recorded separately from evaporator defrost
- Controller reference and matching operating instructions
- Cycle start, termination and display indication described
- Available interval, duration and return-to-cooling information
- Temperature observations identified by location, load and surrounding conditions
- Planned assortment, replenishment times, quantities and destination
- Water route, collection tray, drain requirements and cleaning access
Compare the open-front deli chiller cooling and defrost records