JINYU · Buyer question
How can ingredients be replenished beside an active induction station?
Draw replenishment as a container exchange: the incoming container arrives, occupies a receiving position and replaces the previous container, which then leaves. Measure both containers with their lids. Include the person carrying them on the plan so their route can be compared with the cook's position and cookware movements.
Use an 850 x 500 mm body outline for JY-TSPA5+5 or 400 x 500 mm for JY-TSPT-5D. Both recorded bodies are 200 mm high. Add the measured supporting counter and actual vessel profiles in elevation. This shows whether an ingredient transfer crosses a vessel rim or requires a container to be lifted above the operator's usual receiving surface.
Run an empty-container walkthrough at the point in the menu sequence when replenishment is expected. Mark where the container lid rests and how the empty container returns. Send the drawing, container sizes and replenishment sequence with the model code. Record any movement that needs a second person so it appears in the staffing layout.
Prepare this information
- Incoming and outgoing containers measured
- Lid resting position included
- Carrier and cook routes drawn together
Compare commercial induction cooking equipment