JINYU · Buyer question
How do I check whether a tote lining fold blocks a packed box corner?
Photograph the identified sample with its lining at rest. Name the front and back faces so lower corners can be matched to the drawing. Show any fold lying across the base before placing a box inside. Record the outside dimensions and orientation of the intended outer package. Retain wrapping or sleeves used in the actual packing arrangement; a bare inner box may contact the fabric differently.
Lower the pack in its usual direction while recording the corner that stops. Show the box position relative to the top opening and the lining fold underneath. Remove the box and photograph any fabric displaced during that attempt. Then arrange the lining by hand and repeat with the same pack. Identify that adjustment in the record. If the box now reaches the base, the comparison documents dependence on manual lining placement. If it still stops, show the remaining contact rather than assuming the fold was the only cause.
Attach the original and adjusted views to the canvas tote inquiry. Mark the affected corner on both the lining and outer-shell drawings so the request can be traced to the assembly. Ask for the returned sample to be photographed before anyone arranges its lining for packing. Compare the normal loading action first, followed by any deliberate adjustment. Keep other changes, such as a different box or an added insert, on separate lines because they alter the contact being reviewed.
Prepare this information
- Fold shown before packing
- Original and hand-adjusted trials separated
- Contact located on lining and outer drawings