Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

How do I check whether box corners fit the opened base of a tote sample?

Use the box in its intended outer sleeve or wrapping. Label its orientation and record its outside dimensions, including any projecting flap. Photograph the empty tote base opened by hand, then show the box beside it. Keep the sample reference and drawing revision on the record. A measurement across the bag mouth does not describe the space at the lower corners.

Place the box into the sample in the intended packing direction. Show where each lower corner reaches the fabric, particularly beside folded gussets and base seams. Photograph from above and from the side without pulling the bag outward to hide contact. If the box stops before reaching the base, mark that stopping point. Record whether turning the box changes the contact, keeping the second orientation in a separate photograph. When a removable insert is part of the proposed assembly, identify it and show its position under the box.

Send the corner views through the canvas tote inquiry with the box dimensions and the relevant underside drawing. Ask for the proposed base arrangement to be shown around that same outer package. Distinguish a box caught on a fold from a box wider than the available base: the photographs should locate the issue before a dimension is revised. Keep the original packing view alongside any requested change so the next sample can be checked at the same corners.

Prepare this information

  • Outer box packaging and orientation identified
  • Lower corner contact shown without stretching the bag
  • Requested change tied to the underside drawing

View the canvas tote project

Matching bag projects

Discuss your bag specification

Send your bag brief