Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

How do I compare measured induction energy per finished portion?

Divide the measured energy in kWh for a cooking trial by the number of finished portions produced during the same interval. Record each portion's weight or volume and the recipe's completion point. Equal serving counts can conceal different quantities of food, so compare portion size as well as the energy figure.

JY-TSPT-5D has one flat cooking surface rated at 5 kW. JY-TSPA5+5 has one flat zone and one concave wok zone, each rated at 5 kW. These are electrical ratings, not measured consumption. For the dual-zone model, identify whether the reading covers the whole appliance or one zone, and record the output of every cooking task covered by that reading.

Define the start and finish of the measurement interval, including any warm-up or idle time. Keep the vessel, starting food temperature, ingredient quantities and control changes with each trial record. If the flat zone makes soup while the wok cooks another dish, list the finished quantities separately. A shared energy reading does not show how much energy each dish used.

Send the energy log and portion counts with the selected model inquiry. Identify any changes to the recipe, cookware or measurement interval between runs. The resulting kWh per portion describes those recorded trials; the model ratings alone do not supply that result.

Prepare this information

  • Measured kWh and the trial start and finish
  • Finished portion count and portion weight or volume
  • Whole-appliance or individual-zone measurement
  • Recipe, cookware and starting food temperature

Compare commercial induction cooking models

Matching model records

Discuss your site and product arrangement

Send your equipment brief