JINYU · Buyer question
How do I compare tote dimensions before and after a care trial?
Measure the same sample at the same named points before and after the care trial. Lay the bag in a repeatable position without stretching it, and photograph the tape placement. Record whether the bag is dry at each measurement so a damp reading is not silently compared with a dry one.
Define the dimensions on a sketch. Body width could be measured along the top edge or across the middle, and body height could include or exclude a folded base. State which points you use. Record handle drop separately, with the handles arranged the same way for both measurements.
Write the original measurement, the later measurement and their difference with units. For example, a width changing from 400 mm to 392 mm is a decrease of 8 mm, or 2% of the original width. These figures illustrate the calculation and are not dimensions or expected shrinkage for an offered bag.
Describe any twisting, uneven edges or print distortion beside the measurements. If the tote needs to hold a particular folder or kit, repeat that fit check and record the result. Send the sketch, photographs and trial method through the inquiry entry when discussing a dimensional change, with your required fit stated separately from the measured sample result.
Prepare this information
- Named measurement points and repeatable bag position
- Dry or damp condition recorded for each reading
- Before, after and difference with units
- Shape observations and repeat fit check
Review the custom canvas tote project