JINYU · Buyer question
How do I define the print area on a bag artwork brief?
Define the print area as a dimensioned region on an identified bag panel. Give the artwork width and height, units, and position relative to named edges or a centreline. Show the bag's finished dimensions separately so the overall body size cannot be mistaken for the printable region. State whether the drawing depicts the finished bag or a flat panel before assembly.
Mark seams, gusset folds, handle attachments and closures on the same drawing. Ask the supplier to return the usable print region for the proposed construction and process, including any areas the design must avoid. Keep important lettering and logos inside that returned region. If artwork should reach a cut edge, ask how bleed and trimming are represented on the panel template; do not assign an arbitrary allowance without the actual template.
Place the design at its intended size on the returned drawing and label front, back and any side panels. Include both the artwork boundary and its distance from the chosen reference edges. Use the inquiry entry to share the annotated brief with the bag project reference. Review a proof against these measurements and record changes on the drawing rather than describing placement only as centred or larger.
Prepare this information
- Dimensioned artwork boundary
- Seams and usable print region
- Panel placement offsets