Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

How do I describe an angled pocket opening on a canvas tote drawing?

Draw the tote upright with a named reference face and finished top edge. Mark both ends of the proposed pocket opening. Locate each endpoint horizontally from a named side reference and vertically from the tote top. This records which end is higher without relying on a phrase such as slope left, whose meaning changes when the drawing is reversed.

Dimension the opening along its sloping edge and show the pocket bottom separately. Mark usable depth at the locations relevant to the intended contents. Ask the returned drawing to show any proposed folded edge or closure at the opening. Keep its dimensions separate from the opening endpoints so a trim change does not silently move the pocket.

Place a sample in the same upright orientation as the drawing and photograph the full panel before taking close measurements. Compare both endpoints and the pocket bottom, then try the intended item through the opening. Record an insertion issue separately from a position difference. Send the labelled observations with the inquiry when requesting a revised slope or depth.

Prepare this information

  • Both opening endpoints located from named edges
  • Sloping edge length separated from depth
  • Sample orientation matches the reference face

View the canvas tote project

Matching bag projects

Discuss your bag specification

Send your bag brief