Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

How do I draw the installed height of a countertop induction cooker?

Begin with the measured height of the supporting counter, then draw the 200 mm appliance body above it. Both JY-TSPT-5D and JY-TSPA5+5 list that body height. For example, an 800 mm counter plus a 200 mm body places the top of the body at 1000 mm by arithmetic. The 800 mm counter is a drawing example, not an installation requirement.

Add the actual pot or wok profile to the elevation. Show the vessel rim, lid movement and the height of the adjacent surface receiving the vessel or serving container. The concave zone on JY-TSPA5+5 needs its own vessel profile: the exterior body height alone does not identify where a particular wok rim will sit.

Include the operator position and any overhead shelf in the drawing sent with the inquiry. Request the appliance section drawing, support details and installation spacing for the selected model. Use those dimensions to refine the elevation and rehearse the serving movement with the intended cookware. This gives the layout discussion a working height tied to the actual counter and vessel.

Prepare this information

  • Measured counter height plus 200 mm body
  • Pot or wok rim and lid movement
  • Adjacent landing surface and overhead shelf

View countertop induction model specifications

Matching model records

Discuss your site and product arrangement

Send your equipment brief