Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

How do I read width depth and height on a display fridge drawing?

Read the drawing's own dimension labels and viewing direction before copying values into a shop plan. In a width × depth × height schedule, width follows the cabinet frontage, depth runs from front to back, and height runs vertically from the stated base reference. Check whether the drawing includes handles, canopy parts and the supplied base in those values.

GN-900L is recorded as 900 × 740 × 1400 mm. Its plan rectangle therefore starts at 900 mm across the frontage and 740 mm from front to back. Put a separate elevation beside that plan to show the 1400 mm body height. Do not swap depth and height because a photograph was taken from an angle.

Ask for a dimensioned drawing of the actual offered configuration and identify the customer-facing side on your layout. Mark any dimensions taken from an existing cabinet as site measurements rather than proposed-model specifications. Include the drawing revision in the inquiry. This gives the designer and equipment supplier the same orientation when they discuss a wall, counter edge or service connection.

Prepare this information

  • Labelled viewing direction
  • Plan and elevation
  • Drawing revision

Review the recorded display series

Matching model records

Discuss your site and product arrangement

Send your equipment brief