Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

How do I specify the insert size for a proposed backpack identification window?

Start with a blank card cut to the intended insert outline. Record its width, height and thickness with units, and mark the edge that enters first. Put a simple reference border and orientation arrow on the demonstration card. These marks make it possible to see what the window hides without using a real name, address or contact number in the sample photographs.

On the proposed construction drawing, label the visible opening, the insert pocket and the insertion slot separately. Ask the returned drawing to show how the card sits behind the window border. Feed the demonstration card through the sample opening, seat it in the pocket and photograph each edge through the window. Note whether the reference border disappears evenly or whether one corner remains outside the intended position. Include the card removed from the pocket beside the same sample.

Attach the dimensioned card outline and seated-card photograph to the project inquiry. If a revised insert is proposed, give it a separate drawing reference and repeat insertion with that outline. A photograph of the visible area cannot establish the full card size because the border covers part of it. Keep the card dimensions with the window drawing rather than transferring a size from an unrelated luggage label.

Prepare this information

  • Blank insert dimensions and entering edge recorded
  • Opening, interior pocket and slot labelled separately
  • Seated card photographed with reference border

View the backpack and travel bag project

Matching bag projects

Discuss your bag specification

Send your bag brief