Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

How should I map ingredient loading at an induction soup station?

List the ingredient containers used for one menu batch and measure their outside dimensions. Mark where each container arrives, rests and is emptied. Draw the vessel rim and handles in elevation as well as on the counter plan; a transfer involves lifting height as well as horizontal distance.

For JY-TSPT-5D, add its 200 mm body height to the actual supporting counter height when locating the appliance top. For JY-DTZL-15, start with the recorded 800 mm worktop height. Add the selected vessel profile separately. These reference levels locate the station without assuming a pot depth or supported batch quantity.

Walk through the loading sequence using empty containers and a vessel sample. Note changes of grip, places where a container blocks a control, and where empty containers go afterward. Send the annotated drawing, ingredient-container sizes and model code with the inquiry. Keep the transfer observations attached to the particular vessel used in the walkthrough.

Prepare this information

  • Ingredient containers measured
  • Vessel rim and handles shown in elevation
  • Empty-container return position marked

Compare commercial induction cooking equipment

Matching model records

Discuss your site and product arrangement

Send your equipment brief