Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

Is buying equipment the same as designing an efficient kitchen?

No. An equipment purchase chooses appliances for particular cooking tasks. Kitchen design also places the workstations and plans how food, staff and cookware move between them. A cooker may suit the recipe while its operator waits for a preparation bench or a route to the pass. Begin with your menu and the orders expected in the busiest service period. List the tasks that overlap, the station each task uses and the person who moves food to the next stage.

Put receiving, storage, preparation, cooking, plating and washing on one floor plan. Follow a dish from its ingredients to the pass. Then trace the return of used pots and pans. Mark crossings, repeated trips and positions where staff wait for access. Show doors, counter edges and the space occupied by staff at work. Review the clean preparation route and dirty return route separately. Try moving a bench or storage position on the drawing before assuming you need another appliance.

Use an equipment schedule to connect each appliance with a station on the plan. Record the cooking task, intended batch, body dimensions and utilities for each line. Add the space for cookware handles, loading and cleaning, using installation information for the offered configuration. The appliance body is only part of the working area. Show existing power, water and drainage points and the proposed extraction arrangement where relevant. Request missing installation drawings so the schedule and floor plan describe the same equipment.

JY-TSPA5+5 provides one example for a mixed flat-pan and wok station. It has one flat induction zone and one concave zone, each rated at 5 kW. The total rating is 10 kW and the listed supply is 220 V. Its body measures 850 x 500 x 200 mm. Draw the body, flat pan, wok and handles on your counter plan. Mark where ingredients arrive and where cooked dishes leave. Use the zone arrangement to plan tasks that overlap; it does not state the number of orders the kitchen can serve.

For a separate soup position, JY-TSPT-5D has one flat induction surface rated at 5 kW and 220 V. Its body measures 400 x 500 x 200 mm. It uses magnetic flat-bottom cookware, which is not included. Add your pot dimensions to the drawing and trace the route for carrying soup to service. Compare this position with preparing soup on the shared cooking station. Rehearse the same menu sequence with staff and record waits for cookware, bench space and access to the pass. Those observations help you assess the layout.

Send the floor plan, menu, busy-period order estimate and equipment schedule through the inquiry entry. Name the models under consideration and include cookware dimensions and available utilities. Mark room features that cannot move and queues observed during the menu rehearsal. List the model drawings or configuration details you need for each equipment line. The equipment brief then describes specific tasks and measured space, and the plan shows the proposed relationship between stations.

Prepare this information

  • Menu, busy-period order estimate and tasks that overlap
  • Floor plan with staff positions, doors and counter edges
  • Ingredient, finished-dish and used-cookware routes
  • Station schedule with model footprints, cookware and utilities
  • Installation drawings, loading access and cleaning space
  • Menu-trial waits and positions that cannot move

Compare induction station footprints and electrical ratings

Matching model records

Discuss your site and product arrangement

Send your equipment brief