JINYU · Buyer question
What electrical infrastructure is required for commercial induction?
Commercial induction needs an electrical supply matched to the offered appliance and enough site capacity for the planned equipment load. Start with a schedule that lists each model, quantity, rated power and voltage. Give that schedule to the electrician reviewing the kitchen supply so the discussion covers the full cooking line and the equipment already in use.
JY-TSPT-5D lists 5 kW at 220 V for one flat cooking surface. JY-TSPA5+5 lists 10 kW at 220 V, split between a 5 kW flat zone and a 5 kW concave wok zone. One cooker of each model gives a combined rated power of 15 kW. Keep that total separate from measured energy consumption and the electrical demand calculated for the building.
For the site review, record the available voltage, frequency and phase arrangement, the distribution board serving the kitchen and the existing connected equipment. Mark where the new cookers will stand and which stations operate together during peak service. These details help the electrician assess spare capacity and the connection route rather than assume that a nearby socket suits the selected cooker.
The current model records give voltage and power but do not specify supply phase, frequency, terminal connections, cable size or breaker selection. Request the electrical drawing and installation instructions for the exact configuration offered. Ask the electrician to use those documents and the site survey when specifying the circuit, protective devices, earthing and local isolation. The shared 220 V listing alone does not establish an identical connection for both models.
Draw the connection positions beside the appliance footprints. JY-TSPT-5D measures 400 x 500 x 200 mm, while JY-TSPA5+5 measures 850 x 500 x 200 mm. Include the cable approach and access to the proposed isolation point in the layout review. Use the inquiry form to send the equipment schedule, site supply details, drawing and selected model links. Request the electrical documents with the equipment offer.
Prepare this information
- Model quantities, voltage and total rated power
- Site voltage, frequency, phase arrangement and existing connected loads
- Stations used together during peak service
- Electrical drawing and installation instructions for the offered configuration
- Connection positions, cable approach and access to isolation
Compare the commercial induction cooking models