Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

What is the best way to clean my wok burner?

Use the cleaning procedure specified for your exact appliance, starting with whether your wok station uses gas or induction. A gas burner has different parts from an induction cooking surface. For a gas unit, consult the burner cleaning instructions to identify which parts the operator may remove, which tools suit those parts, and which tasks belong to a service technician. An injector cleaning tool specified for a gas burner is not a cleaning method for the induction models linked here.

For an induction unit, switch off the appliance and follow its instructions for cooling down and electrical isolation before cleaning. Remove cookware once it can be handled safely. Use the documented surface-cleaning method to remove food and grease from the cooking area, then clean the exterior housing and controls as the instructions describe. Select the cloth or pad, cleaning product, and amount of moisture directly from those instructions. A stainless steel body does not indicate which cleaner or abrasive is suitable for the cooking surface, controls, or joints. If the care sheet is missing, request those details using the model number.

JY-TSPA5+5 combines one concave wok zone and one flat zone. Each zone is rated at 5 kW, with 10 kW total and a listed 220 V supply. Give the concave surface its own place on the cleaning sheet so the operator checks the bowl-shaped area after removing the wok. Record residue around the cooking position and the condition of the adjacent flat zone separately. Treat the wok itself as a separate item with its own cookware care instructions. These product records establish the zone layout, but do not specify approved cleaners, removable parts, or a cleaning temperature.

Keep cleaning liquids and loosened residue away from openings and electrical connections, following the appliance care instructions. Inspect the accessible exterior for residue, visible damage, and obstructed ventilation areas identified in the manual. If residue remains, record its location and the method already used before requesting the next cleaning step. Photograph cracks, a damaged control, or a recurring spill path for your service contact. A cleaning record should describe what the operator observed rather than assign an unverified fault or direct someone to dismantle the unit.

If the counter also includes the JY-TSPT-5D, record it separately as a single flat-surface induction soup cooker rated at 5 kW and 220 V. Its flat cooking surface is intended for magnetic flat-bottom cookware. Maintain an individual care sheet for each appliance that records the model, affected surface, cleaning method, and date. Use the model links below to identify your configuration. Through the inquiry entry, send the model code, a photograph of the cooking area, and a description of the residue to request the cleaning instructions for that exact appliance.

Prepare this information

  • Exact model and gas or induction cooking system
  • Cooling, isolation, and operator cleaning procedures from the appliance instructions
  • Approved cleaner, cloth or pad, and moisture method for each surface
  • Concave wok zone, adjacent flat zone, and separate cookware care
  • Residue location, visible damage, and cleaning method already used
  • Model code and photographs for a cleaning-document inquiry

Compare the wok and flat induction cooking configurations

Matching model records

Discuss your site and product arrangement

Send your equipment brief