Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

What should consultants consider when specifying induction equipment?

Specify the cooking work before choosing the induction model. List the menu items, batch sizes, cookware in use at the same time and the sequence between preparation and service. A soup position with one pot and a station that alternates flat-pan cooking with wok work need different zone arrangements. Put those tasks beside each equipment line so the operator, kitchen designer and electrical designer can discuss the same station. Include the intended cookware with the brief, rather than using a power rating as a substitute for cooking capacity.

Use the published model records to compare concrete options. JY-TSPT-5D has one flat cooking surface rated at 5 kW and 220 V. Its body measures 400 x 500 x 200 mm, and it uses magnetic flat-bottom cookware, which is not included. JY-TSPA5+5 combines one flat zone with one concave wok zone. Each zone is rated at 5 kW, for 10 kW total at 220 V, in an 850 x 500 x 200 mm body. Enter the zone arrangement as well as total power in the schedule; two zones do not necessarily mean two flat cooking positions.

Coordinate the electrical schedule with the proposed appliance configuration and the site's available supply. For several units, show model numbers, quantities and individual ratings so the electrical designer can assess the combined installation and expected simultaneous use. Request the connection details and installation instructions for the offered units before completing the connection drawing. A published 220 V rating alone does not describe the phase arrangement, cable, protective device or connection method. Carry the documented requirements into the project drawings instead of calculating a complete installation from the catalogue voltage alone.

Draw the station with its cookware and working movements. Mark the equipment body, pot or wok dimensions, cookware handle positions and the path for moving cooked food to the next counter. Show how the operator reaches the controls when cookware is in place. Add cleaning and service access to the layout review, and request the model's installation drawing for any specified clearances. Coordinate the cooking tasks with the project's ventilation design. The 400 mm or 850 mm body width is a starting measurement for the counter plan; cookware handles and adjacent work still occupy space.

Make the equipment proposal traceable to the station schedule. Match each offered model to its drawing, operating documents and cookware arrangement, then record a cooking trial using the planned recipe and batch size. Note the starting conditions, elapsed time and finished result so the operator can judge the proposed station against the actual menu. Send the schedule, site supply details and counter drawing through the inquiry entry with the selected model. Keep revisions against the same equipment line so a change in zone configuration reaches the electrical and layout drawings together.

Prepare this information

  • Menu, batch sizes, pots and woks used together, and cooking sequence for each station
  • Model numbers, quantities, zone arrangements and rated electrical power
  • Available site supply and offered-unit connection and installation documents
  • Counter drawing with cookware dimensions, handle positions, controls and service access
  • Equipment-line references, drawing revisions and a recorded recipe trial

Compare single flat-zone and combined flat-and-wok models

Matching model records

Discuss your site and product arrangement

Send your equipment brief