Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

What should I record if backpack lining bunches under a removable base board?

Photograph the lining and board in the arrangement where bunching appeared. Show which board edge is raised and where the fold emerges. Use a wider view to locate the fold against a named backpack panel, then a close view of the contact. Record whether the bunching appeared during removal, reinsertion or packing; these starting conditions lead to different movements.

Lift the board using its intended access route and photograph the fabric underneath before smoothing it. Locate a loose fold, seam allowance or sleeve edge on the inside drawing. Return the board using the original movement and watch that location. Show whether the leading edge pushes the fabric ahead, traps it beneath a corner or draws it toward the opening. Keep the fabric visible until the board reaches its resting position.

Send the contact sequence through the backpack project inquiry with the affected area marked. A request might concern lining placement, the board outline or access to the sleeve; name the proposed revision separately from the observation. Repeat the recorded insertion on the revised sample. Keep the original fold photograph beside the result so a flat final view does not hide the movement that produced the problem.

Prepare this information

  • Original fold and raised edge located
  • Fabric shown before smoothing
  • Leading-edge contact followed during return

View the backpack and travel bag project

Matching bag projects

Discuss your bag specification

Send your bag brief