JINYU · Buyer question
What should I record when backpack pocket lining catches in a key clip?
Photograph the proposed key clip in its ordinary stored position before pulling the lining away. Include the nearest pocket seam, lining edge and attachment point in the same view. Mark the fabric that enters the opening: a loose lining fold, a bound edge or material from an adjacent slot. Use the intended dummy key set so its position relative to the lining remains part of the record.
Repeat the movement that brought the fabric into contact with the clip. Separate opening the gate from drawing the keys out through the pocket mouth; the fabric may enter at either step. Show where the reviewer first notices resistance and which movement clears it. After releasing the fabric, photograph the contacted area and return the keys to their original storage position. Close and reopen the pocket with its assigned contents, then check whether the same fold returns beside the gate. Keep the location marked rather than smoothing the lining between every view.
Attach the sequence and seam reference to the backpack inquiry. A proposed revision might move the anchor, change the clip orientation or adjust the nearby lining arrangement. Identify which part changes on the returned drawing and repeat the original contact movement on the next sample. Record the result for that arrangement, including a remaining hand movement needed to clear the lining.
Prepare this information
- Contacting fabric and seam identified
- Gate operation separated from retrieval
- Original lining position used for comparison
View the backpack and travel bag project