JINYU · Buyer question
Which equipment dimensions should a UK cafe designer check against an existing counter?
Measure the counter's usable width and depth, its finished height and any overhead obstruction. Record the dimensions in millimetres and photograph the tape positions so the designer can distinguish the support surface from a decorative counter edge. Show sockets, nearby equipment and the staff working side on a plan with the same measurement references.
GN-900CT measures 900 × 530 × 730 mm; GN-1200CT measures 1200 × 530 × 730 mm. The extra cabinet width is 300 mm while depth and height remain the same. Draw each body footprint separately on the measured counter plan. Keep those body dimensions separate from installation allowances, projecting connections and the working space behind the rear sliding doors.
Ask for the offered configuration's support requirements and installed mass before accepting the counter structure. Review sightlines from the customer side and tray movement from the staff side using the proposed cabinet height. Where the existing counter has a tight edge or raised surround, send a section drawing as well as the plan. Include the selected model and missing dimensions in the inquiry.
Prepare this information
- Measured finished counter
- Separate body and installation outlines
- Support and staff-access review
View the matching cabinet series