JINYU · Planning guide
Beverage cooler door conflicts: review the surrounding equipment together
A cooler can fit its allocated floor rectangle while its open door crosses another working area. Review the moving parts of the surrounding equipment on the same plan. The GN-868FM model record identifies two hinged glass doors; ask for the opening drawing for the offered configuration before drawing their movement.
These four questions address a neighbouring appliance door, a projecting wall return, a request to change opening direction and a counter revision after the initial layout review. The general beverage selection guide explains opening direction. Here the task is to locate a particular conflict and give the designer enough information to resolve it.
Attach the marked plan to a GN-868FM inquiry. Label the drawing revision and distinguish measurements taken on site from dimensions still requested from the supplier. Keep the revised equipment positions with the project record so a later furniture change can be compared with the arrangement reviewed.
Questions to resolve before ordering
- How do I check whether a beverage cooler door clashes with a neighbouring appliance door?
- What should I measure where a beverage cooler door opens beside a wall return?
- What information should I send when asking to change a beverage cooler door opening direction?
- What door-access checks should I repeat after changing the counter beside a beverage cooler?
Recorded cabinet dimensions
| Model | Width × depth × height |
|---|---|
| GN-868FM | 1220 × 690 × 2048 mm |