JINYU · Buyer question
What should I measure where a beverage cooler door opens beside a wall return?
Measure the finished wall return from a fixed point visible on your plan, such as the face of the main wall. Record its projection, thickness and height. Include skirting, rails or trim that project farther than the wall surface. Photograph the corner with the measurement points labelled so the designer can locate the feature without interpreting an unmarked close-up.
Place the offered cooler opening drawing over that site plan. Compare the door edge and handle movement with the wall return. Where two outlines overlap in plan, add an elevation or section to show their heights; a floor drawing alone does not establish whether the physical parts meet. Ask which door position is needed for the intended access task, rather than selecting an arbitrary opening angle from a photograph.
For a GN-868FM inquiry, attach the site measurements and the requested opening detail as separate records. Ask for the proposed cabinet position relative to the finished wall. If the proposed solution moves the cooler, have the installation layout reviewed with that new position, including the access details in its instructions. Record the measured wall shape and the drawing revision used for the decision.
Prepare this information
- Finished wall return and projections measured
- Handle path compared at the relevant height
- Revised cooler position tied to the site plan
Review the two-door beverage cooler series