Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Planning guide

Flat and wok induction workflow: vessel fit and two-pan service trials

JY-TSPA5+5 combines one flat zone and one concave wok zone in an 850 x 500 x 200 mm countertop body. Each zone lists 5 kW, with 10 kW total at 220 V. Plan the two vessels as a working pair: their bases, handles and transfer movements affect how the station serves a menu.

A wok profile describes more than its rim diameter. Record the curved underside, vessel depth and handles, then give the flat-bottom pan a separate record. The model dimensions locate the appliance body; the offered surface drawing and cookware information are needed to compare the vessels with their intended zones.

The questions below address wok measurements, moving a vessel between zones, recording simultaneous cooking and transferring food between pans. Link the vessel records to a specific menu task and send them with the model inquiry. Keep measured trial results with the vessel and batch used so another cook can repeat the setup.

Questions to resolve before ordering

Recorded cabinet dimensions

Cabinet body dimensions; installation space and interior fit require a separate review.
ModelWidth × depth × height
JY-TSPA5+5850 x 500 x 200 mm

Discuss your site and product arrangement

Send your equipment brief