JINYU · Buyer question
How should I plan food transfer between a wok and an adjacent flat pan?
Begin with the transfer itself: identify which vessel receives the food, the amount moved at a time and whether the cook uses a ladle, scoop or another tool. Draw the two vessel rims, handles and the tool path on a plan of the JY-TSPA5+5 station. Use the offered drawing to locate the flat and concave zones within the 850 x 500 mm body.
Add a side view if one vessel has a higher rim. Include the measured counter height, the 200 mm appliance body and the actual vessel profiles. Show any temporary receiving container and where the tool rests between transfers. This makes a high-rim wok and a shallow flat pan distinct in the working drawing even when both occupy the same countertop station.
Rehearse the proposed reach and transfer with empty vessels in their planned positions, then note any handle or container movement needed. Send the annotated drawing, vessel measurements and transfer sequence through the inquiry entry. Request the surface layout and operating information for the offered unit; the body dimensions alone do not specify zone spacing or the distance between the two vessel rims.
Prepare this information
- Transfer direction, quantity and tool
- Vessel rims, handles and receiving-container position
- Empty-vessel rehearsal notes and offered surface layout
View the flat and wok induction station