Beverage cabinet arrangement · FS and FM
Beverage Display Fridge Sizes: Two Single-Door vs One Double-Door
Compare two single-door GN-620FS coolers with one double-door GN-868FM. Read the body dimensions, capacity totals and electrical ratings before choosing one location or a split drinks layout.
Compare the arrangements →
Recorded specifications for each cabinet
| Model | Dimensions (mm) | Capacity | Rated power | Supply | Shelves | Doors |
|---|---|---|---|---|---|---|
| GN-620FS | 620 × 700 × 2018 mm | 410 L | 210 W | 220-240V/50Hz | 4 wire shelves | Hinged glass door |
| GN-868FM | 1220 × 690 × 2048 mm | 960 L | 300 W | 220-240V/50Hz | 4 shelves | 2 hinged glass doors |
Calculated arrangement totals
| Arrangement | Body width sum (mm) | Body footprints (m2) | Listed capacity sum (L) | Rated power sum (W) |
|---|---|---|---|---|
| 1 × GN-620FS | 620 | 0.4340 | 410 | 210 |
| 2 × GN-620FS | 1240 | 0.8680 | 820 | 420 |
| 1 × GN-868FM | 1220 | 0.8418 | 960 | 300 |
Download the three arrangement rows (CSV). The baseline row describes one GN-620FS; the pair row sums two units. Body areas are calculated from width × depth × quantity ÷ 1,000,000.
Draw both arrangements on the same site plan
- Outline each cabinet body and label its model code and quantity.
- Show the proposed spacing from the selected installation drawings.
- Mark separate locations individually; keep a straight-run total separate from a split layout.
- Assign bottles and cans to each interior using measured shelf drawings.
- List electrical connections and shipment packages by individual unit.
How does the display fridge size change with two single-door cabinets?
Two GN-620FS cabinets have a combined body width of 1240 mm. Each is 700 mm deep and 2018 mm high. One GN-868FM is 1220 mm wide, 690 mm deep and 2048 mm high. The pair therefore uses 20 mm more summed body width, has a 10 mm greater maximum depth and is 30 mm lower. These figures compare closed cabinet bodies before installation spaces.
For a side-by-side proposal, draw two separate 620 mm rectangles and the separation required by the installation documents. Draw the 1220 mm alternative on a second version of the same plan. For a split proposal, label each location separately; 1240 mm remains a purchasing total rather than the width of either individual bay.
Do two 410 L coolers provide the same capacity as one 960 L cooler?
The GN-620FS pair totals 820 L of listed capacity, compared with 960 L for GN-868FM. The two-door cabinet has 140 L more listed capacity despite its 20 mm smaller body width. This is a comparison of recorded capacities across different cabinet constructions. Use the same bottle and can register when requesting a usable shelf layout for each proposal.
The pair keeps the assortment in two separate interiors. A bottle assigned to one cabinet cannot use an empty space in the other without being moved. Allocate products by position, bottle height and maximum diameter. Keep the requested arrangement beside the shelf drawing returned for that model so the litre comparison leads to an actual assortment review.
Are eight shelves across two coolers equivalent to four shelves behind two doors?
Each GN-620FS lists four wire shelves, so two units contain eight listed shelves across separate cabinets. GN-868FM lists four shelves in one two-door cabinet. The count does not state usable shelf width, depth, load capacity or bottle clearance. Retain the model-specific wording in the equipment schedule and request the dimensions needed for the proposed drinks.
Number positions FS-A and FS-B for the pair, then label the shelf levels within each. Use a separate FM drawing for the double-door alternative. Send the same container measurements with both requests. A shelf count alone cannot establish how many facings or tall bottles fit, especially when comparing shelves from cabinets with substantially different overall widths.
What changes when the two single-door coolers stand in different places?
A split arrangement can put one GN-620FS at each of two nominated drinks positions. Each position needs a 620 × 700 mm cabinet body with 2018 mm height. Draw the customer approach and the hinged-door opening at both locations. Record the route used to replenish each cabinet from the stock area, including nearby queue lines and shelving projections.
One GN-868FM instead occupies a single 1220 × 690 mm position with 2048 mm height and two hinged glass doors. Compare that location against the two individual FS positions. Keep the intended assortment allocation in the brief so the review covers where drinks are retrieved and restocked, as well as the total equipment dimensions.
How should I compare the electrical ratings of the two arrangements?
GN-620FS records 210 W rated power per cabinet. Two units sum to 420 W. GN-868FM records 300 W, giving a difference of 120 W between the arrangement totals. Both model records specify 220-240V/50Hz. List each FS unit separately in the electrical schedule, with its position reference and proposed connection point, so two physical appliances remain visible in the brief.
Summed rated watts do not give daily electricity consumption or operating cost. Request measured consumption with its test conditions if that evidence is needed for selection. Forward the individual model specifications and the site supply information to the project installer, retaining the equipment quantities and drawing revision used for the comparison.
Will either arrangement fit a 1250 mm-wide drinks bay?
Using only body widths, an illustrative 1250 mm bay leaves 10 mm after subtracting the 1240 mm FS pair, or 30 mm after subtracting GN-868FM at 1220 mm. Those balances describe unallocated frontage. Installation drawings establish the separation and access spaces for the offered configuration, so these small arithmetic balances do not establish an installed fit.
Measure the bay depth and overhead height as well. Mark adjacent shelf projections and the area swept by each hinged door using the configuration drawings. Keep the two FS cabinet outlines distinct even when they stand together. Photograph the bay with its measurement reference and include the floor plan when asking JINYU to review the selected arrangement.
Which dimensions belong on the delivery route survey?
For two GN-620FS units, record two appliances and request the packed dimensions and gross weight for each shipment package. For GN-868FM, request the corresponding package schedule against that model. The body dimensions in this comparison describe the closed equipment. A package may include transport protection or a base that changes the dimensions used at entrances and turns.
Measure the receiving entrance, corridor turns and final approach to each proposed position. Separate the side-by-side and split FS plans when the destinations within the building differ. Attach the shipment-specific package schedule when it becomes available, keeping its revision with the route survey rather than substituting cabinet width for packed width.
What should I send to compare these beverage cooler proposals?
Download the comparison CSV and identify the arrangement under review: one GN-620FS as a baseline, two GN-620FS units, or one GN-868FM. Add the requested quantities, location references and destination to your inquiry. Include the bay measurements, bottle register, electrical supply and current layout drawing. Mark whether the FS pair stands together or in separate positions.
Ask the response to identify the offered configuration, usable shelf dimensions, door-opening drawing, installation spaces and package schedule for each equipment line. Keep the returned documents with the same position labels used on your plan. That gives the purchasing and fit-out teams a common record for comparing cabinet bodies, assortment access and the route into the building.