JINYU model GN-900C3
JINYU GN-900C3 Curved Glass Cake Display
Arrange a chilled cake selection in a 900 mm-wide curved glass cabinet. GN-900C3 has 355 L recorded capacity, three glass shelves and two sliding doors on the service side.
Reference price US$957.58 / unit
Final quote depends on quantity and configuration.
GN-900C3 specifications
| Overall dimensions (W × D × H) | 900 × 730 × 1300 mm |
|---|---|
| Capacity | 355 L |
| Temperature range | 2-8 °C |
| Rated power | 460 W |
| Voltage / frequency | 220-240V/50Hz |
| Doors | 2 sliding doors on the service side |
| Glass | Curved front glass with glass sides |
| Shelves | 3 glass shelves |
| Number of shelves | 3 |
| Cooling | Fan Cooling |
| Refrigerant | R290 (Propane) |
| Installation | Freestanding |
At 900 × 730 × 1300 mm, GN-900C3 is the narrower of these two C3 cabinets. Use its full footprint when planning a tea room, bakery corner or café counter, then allow working space behind the service doors. The 355 L capacity describes the appliance; tray sizes and product heights determine your actual display arrangement.
Curved front glass and glass sides frame the display. Three glass shelves provide raised positions above the lower deck shown in the photographs, while the two service-side sliding doors give staff access from behind. Check your intended trays and cake stands against the shelf layout before setting the menu arrangement.
The recorded specification is fan cooling, R290 (propane), a 2-8 °C temperature range and 460 W rated power. This page covers the 220-240V/50Hz configuration of GN-900C3. Rated power is an electrical specification; it does not state daily energy consumption.
Where the GN-900C3 fits
- Tea room display. Use the 900 mm cabinet width to plan a focused cake selection beside the tea service area.
- Bakery corner. Compare the 730 mm cabinet depth with the counter plan and keep the service side accessible to staff.
- Café cake counter. Arrange trays across three glass shelves and check the height of taller cakes against the intended shelf layout.
GN-900C3 questions
How much floor space does GN-900C3 need?
The cabinet measures 900 × 730 × 1300 mm, stated as width, depth and height. Those dimensions describe the appliance body rather than a complete installation area. Mark out the footprint and the staff position behind its two service-side sliding doors. Include access for cleaning and servicing in the layout. If it will sit beneath shelving or beside other equipment, send the surrounding dimensions with your GN-900C3 inquiry before finalising the counter plan.
How many cakes fit in the 355 L cabinet?
The recorded 355 L capacity does not provide a cake count. GN-900C3 has three glass shelves, and photographs also show a lower display deck. Cake diameter, tray depth, stand height and spacing determine how you can arrange your own selection. Start with the trays and products used in your café or bakery. Share their dimensions with JINYU to discuss the shelf arrangement instead of converting the capacity figure into a serving quantity.
What cooling and electrical specifications are recorded?
GN-900C3 uses fan cooling and R290 (propane), with a recorded temperature range of 2-8 °C. Its rated power is 460 W and its listed electrical configuration is 220-240V/50Hz. These figures describe this model's recorded configuration. Rated power alone cannot tell you its daily electricity consumption, and the temperature range is not a statement of every food's holding requirements. Match your purchasing brief and installation plan to the exact model and electrical supply.
When should I compare GN-900C3 with GN-1800C3?
Compare the two when your display plan needs more cabinet width or a different recorded capacity. GN-900C3 is 900 mm wide with 355 L capacity; GN-1800C3 is 1800 mm wide with 550 L capacity. They share a 730 mm depth, 1300 mm height and three glass shelves. Use the series comparison alongside your tray sizes and available staff aisle. The larger cabinet's 640 W rated power also differs from GN-900C3's 460 W.
Let's plan your equipment
Request a configuration & shipping review
Tell us your model, electrical supply and destination. We will review suitability and delivery terms before a quotation. No price, minimum order or delivery date is implied.