Height planning · Four models at 1200 mm width
Display Fridge Height: Counter Support, Overhead Space and Sightlines
Compare cabinet height with installed top height. Work through a support-height example, measure the overhead obstruction and review customer and staff positions.
Compare all four models →
Four cabinet heights at the same 1200 mm width
| JINYU model | Glass profile | W × D × H (mm) | Capacity | Installation | Rated power | Shelves | Service access |
|---|---|---|---|---|---|---|---|
| GN-1200CK3 | Curved front glass with glass sides | 1200 × 740 × 1300 mm | 400 L | Freestanding | 515 W | 3 glass shelves | 2 sliding doors on the service side |
| GN-1200RF2 | Straight glass front and sides | 1200 × 730 × 1200 mm | 425 L | Freestanding | 455 W | 2 glass shelves | 2 sliding doors on the service side |
| GN-1200RK3 | Straight glass front and sides | 1200 × 740 × 1300 mm | 545 L | Freestanding | 515 W | 3 glass shelves | 2 sliding doors on the service side |
| GN-1200RT | Straight (right-angle) glass | 1200 × 530 × 730 mm | 190 L | Countertop | 360 W | 2 chrome-plated shelves | Sliding doors at rear |
Worked height calculation: one floor datum
Example assumptions: RT stands on a 900 mm support; the other cabinets are freestanding at the floor datum; the overhead shelf underside is 1800 mm above that datum. These are planning assumptions, not model installation requirements.
| Model | Support example | Cabinet height | Top above floor | Gap below 1800 mm shelf |
|---|---|---|---|---|
| GN-1200CK3 | 0 | 1300 | 1300 | 500 |
| GN-1200RF2 | 0 | 1200 | 1200 | 600 |
| GN-1200RK3 | 0 | 1300 | 1300 | 500 |
| GN-1200RT | 900 | 730 | 1630 | 170 |
Height and sightline worksheet
- Site datum: identify the floor level used for support, customer and overhead measurements.
- Support: record measured height, construction and the selected cabinet installation drawing.
- Obstruction: record the lowest shelf, bracket, light or sign above the cabinet.
- Customer view: mark observation position, shelf reference and the product or label being assessed.
- Staff access: mark loading opening elevation, tray dimensions and the nearby set-down surface.
- Revision: retain the site elevation and corresponding model drawing together.
How do I compare display fridge height above the floor?
Add the supporting surface height to the cabinet height for a countertop model. Use the cabinet's recorded overall height for a freestanding model on its specified installation surface. A 730 mm countertop cabinet does not present its glass at 730 mm above the shop floor when it stands on a counter. Put both the support and the cabinet on a side elevation before comparing what customers will see.
For example, JINYU GN-1200RT is 730 mm high. On a hypothetical 900 mm support, its calculated top is 1630 mm above the floor. GN-1200RF2 is a 1200 mm-high freestanding cabinet; GN-1200CK3 and GN-1200RK3 are 1300 mm high. All four are 1200 mm wide. Their shared frontage therefore produces three different top heights in this example. The 900 mm support is a layout assumption, not an installation specification.
Does a lower cabinet always create a lower customer view?
The RT cabinet is shorter as equipment, yet the example places its top 430 mm above the RF2 top and 330 mm above the CK3 or RK3 top. This reverses the order obtained by comparing cabinet heights alone. Use the actual support height from the joinery drawing to repeat the calculation for your premises. Record the floor datum beside every measurement, especially if the display and customer approach are on different levels.
Top height is only one reference. Ask for the elevation of the usable shelves, front glass edges and any opaque base sections. Those positions determine where displayed items sit within the cabinet outline. Overall dimensions cannot establish that a particular cake or label will be visible from the entrance or ordering position.
How much space remains beneath an overhead shelf?
Consider a hypothetical fixed shelf whose underside is 1800 mm above the same floor datum. Subtracting the example top heights leaves a geometric gap of 170 mm over GN-1200RT on its 900 mm support, 600 mm over GN-1200RF2 and 500 mm over either 1300 mm-high model. The second table shows each subtraction so a designer can replace the example with measured site values.
These gaps are not approved ventilation or service clearances. Check the model's installation instructions and any maintenance access before specifying an overhead shelf. Include lights, brackets, sockets and signs that project below it. A shelf drawn at 1800 mm may have a lower obstruction beneath its nominal underside. Mark the lowest actual obstruction separately on the elevation.
Which depth and capacity differences accompany these heights?
GN-1200RT measures 1200 × 530 × 730 mm and records 190 L. GN-1200RF2 measures 1200 × 730 × 1200 mm and records 425 L. The CK3 and RK3 cabinets both measure 1200 × 740 × 1300 mm, yet their listed capacities are 400 L and 545 L respectively. Matching external dimensions do not imply matching internal capacity.
RF2 lists two glass shelves; CK3 and RK3 list three glass shelves. RT lists two chrome-plated shelves. Request usable shelf dimensions and opening heights for your actual trays. Compare the resulting assortment with the customer view rather than treating an extra shelf or a larger litre figure as a proven increase in visible cake positions.
How should I test the customer sightline on the shop plan?
Draw the proposed cabinet and support to scale in a side elevation. Mark the actual customer approach, ordering point and menu position. Use a measured observation point from your site review and draw a line toward the product or label being assessed. Identify what that line crosses: counter edge, cabinet base, shelf edge, product in front or overhead sign.
Repeat the review with a physical outline or a model-specific demonstration photograph taken from the same relative position. Keep the camera position and selected product consistent between options. Record observed obstructions against the particular shelf and item. No single viewing height or angle on this page represents every customer, so use several relevant positions from your own premises.
How does staff access change the height decision?
All four model records describe sliding service access at the rear or service side. Show the staff position behind each cabinet and the route from preparation to the loading opening. With a countertop model, the counter contributes to the height of that opening. Ask for its actual elevation and clear dimensions before assigning a loaded tray to a shelf.
Rehearse the tray movement with its finished contents and neighbouring equipment represented. Record where staff set it down, change grip or need to reach around a fitting. Keep that task review separate from the front customer-view photograph. A cabinet can offer an acceptable front view while its proposed supporting counter creates a difficult loading position behind it.
What measurements belong in a height and sightline inquiry?
Send the complete model codes, support height, floor datum, overhead obstruction height and a side elevation. Add front and staff-side photographs, tray dimensions, finished product heights and intended shelf assignments. Identify the customer positions used in the viewing review and the staff position used in the loading review. Include the site voltage and frequency with the equipment schedule.
Ask Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司) for the selected configuration drawing, shelf elevations, usable openings and installation requirements. Keep the returned drawing revision with the site elevation. When a support or overhead shelf changes, recalculate the top height and geometric gap, then repeat the affected viewing and loading checks.