Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

Six models · 530 to 730 mm cabinet depths

Display fridge sizes for a 700 mm-deep bay

Compare six JINYU display fridge bodies at 530, 660, 700 and 730 mm depth, with a 700 mm bay calculation, access differences and an installation survey.

Compare model sizes →
JINYU GN-1000R2-J economy straight glass cake display in a cafe or bakery
JINYU GN-1000R2-J · 1000 × 660 × 1200 mm · freestanding cake display.

Six cabinet bodies against a 700 mm depth boundary

Recorded exterior dimensions and specifications; body area is calculated as width × depth.
ModelW × D × HCapacityInstallationRated powerBody footprint
GN-660RT660 × 530 × 730 mm102 LCountertop250 W0.350 m2
GN-1200RT1200 × 530 × 730 mm190 LCountertop360 W0.636 m2
GN-1000R2-J1000 × 660 × 1200 mm160 LFreestanding455 W0.660 m2
GN-1200R2-J1200 × 660 × 1200 mm170 LFreestanding455 W0.792 m2
GN-620FS620 × 700 × 2018 mm410 LFreestanding210 W0.434 m2
GN-1200RF21200 × 730 × 1200 mm425 LFreestanding455 W0.876 m2

Body depth balances and access arrangements

700 mm minus recorded body depth. Negative means projection beyond the depth boundary; no row establishes installation approval.
ModelGross depth balanceDoor arrangementCabinet height
GN-660RT170 mmSliding doors at back730 mm
GN-1200RT170 mmSliding doors at rear730 mm
GN-1000R2-J40 mm2 sliding glass doors at rear1200 mm
GN-1200R2-J40 mm2 sliding glass doors at rear1200 mm
GN-620FS0 mmHinged glass door2018 mm
GN-1200RF2-30 mm2 sliding doors on the service side1200 mm

Which display fridge bodies are shallower than a 700 mm bay?

The RT countertop cabinets in this comparison are 530 mm deep: GN-660RT measures 660 × 530 × 730 mm and GN-1200RT measures 1200 × 530 × 730 mm. The freestanding GN-1000R2-J and GN-1200R2-J are 660 mm deep, with widths of 1000 and 1200 mm and a shared height of 1200 mm. Dimensions follow width × depth × height. These four bodies are shallower than the illustrative 700 mm boundary.

GN-620FS is exactly 700 mm deep, while GN-1200RF2 is 730 mm deep. The table deliberately includes both as boundary comparisons. Choose a format before comparing litres: RT needs a supporting counter, R2-J and RF2 are freestanding cake displays, and FS is an upright glass-door beverage cooler. A smaller body depth does not establish suitability for an enclosed recess or permission to place the rear against a wall.

What do the 170, 40, zero and minus 30 mm depth balances mean?

Subtract cabinet depth from the example 700 mm bay. RT leaves 170 mm of gross depth, R2-J leaves 40 mm, FS leaves zero and RF2 exceeds the boundary by 30 mm. These are geometric differences between the listed exterior and the measured bay. They are not ventilation clearances or staff working spaces. The 40 mm remainder beside a 660 mm body cannot be assigned as an approved rear gap without the installation drawing.

Mark the datum used for the subtraction. If the rear edge is fixed, a 730 mm body projects 30 mm beyond a 700 mm front boundary. If the front edge is fixed, it extends 30 mm behind the rear boundary instead. Show wall finishes, skirting and projecting sockets in the section drawing. Measure the narrowest available depth at the actual equipment position rather than using the nominal furniture depth.

Can a rear-loading cake display sit in a shallow wall recess?

RT and R2-J have sliding doors at the rear. RF2 places its two sliding doors on the service side. A depth calculation alone leaves their loading route unresolved. Draw the person approaching those doors, the tray movement and the route from the display to the packing surface. A cabinet placed with its service side inaccessible cannot be evaluated from the customer-front outline alone.

For an existing wall recess, send photographs from both ends and an overhead plan. Mark whether rear access exists, whether the supporting furniture moves and which surfaces are fixed. Request a model-specific installation arrangement before adapting the furniture. Retain any access change in the drawing revision: moving the cabinet forward can change both the customer aisle and the place where staff serve products. The table does not identify any model as approved for built-in installation.

How do countertop and floor-standing heights change the same bay?

The two RT examples are 730 mm high. On an illustrative 900 mm-high counter their tops stand 1630 mm above the floor. R2-J and RF2 are freestanding and 1200 mm high, while GN-620FS is 2018 mm high. These elevations describe different equipment positions even when the cabinet body fits within the same depth boundary. Add the actual support height to the RT body height when drawing overhead shelving and the customer view.

GN-620FS uses a hinged glass door. Include its opening space and the staff or customer position in the plan, then request the door drawing for the offered configuration. R2-J rear sliding access needs a different working arrangement. Measure the bay height, front opening and receiving route independently. A 700 mm-deep space can still be too low, too narrow or inaccessible for the chosen format.

How much frontage and capacity does each shallow alternative provide?

Within RT, GN-660RT lists 102 L and GN-1200RT 190 L. The wider cabinet adds 540 mm of frontage and 88 L of listed volume while retaining the 530 mm depth and 730 mm height. Within R2-J, GN-1000R2-J lists 160 L and GN-1200R2-J 170 L: a 200 mm width increase and 10 L capacity increase at the same 660 mm depth and 1200 mm height.

At 1200 mm width, GN-1200RT and GN-1200R2-J illustrate why litres cannot choose the installation format. One is a countertop unit; the other stands on the floor. GN-620FS lists 410 L and GN-1200RF2 425 L, but their door arrangements and heights differ substantially. Keep product dimensions on a separate assortment sheet. Request usable shelf dimensions and loading openings rather than converting the listed litres into a promised cake or bottle count.

Which electrical ratings belong on the six-model shortlist?

GN-660RT records 250 W and GN-1200RT 360 W. Both R2-J examples record 455 W. GN-620FS records 210 W and GN-1200RF2 455 W. Each of these records specifies 220-240V/50Hz. RT, R2-J and RF2 list a 2-8°C range; the FS beverage cooler lists 0-10°C. Compare the intended product storage instructions with the selected model range before treating the formats as interchangeable.

Keep the model code beside the supply and rated watts in the equipment schedule. Rated power does not establish daily energy consumption or the ventilation space needed in the proposed bay. Send the site supply details and ask for connection and installation documentation for the same configuration. Where the counter holds other appliances, include their separate equipment entries in the site electrical review.

What should I send for a 700 mm-deep bay assessment?

Send a plan and section showing the measured clear width, depth and height, the front alignment line and the counter support height if applicable. Number photographs of rear access, nearby sockets and fixed projections. Identify the intended use and shortlist by complete model code. Attach tray or bottle dimensions, the serving route and the destination supply details. Keep the bay measurements and equipment list under one drawing revision.

Ask for the offered cabinet drawing, required installation spaces, door opening or loading access, support information and usable shelf dimensions. Survey the receiving route separately using shipment-specific packed dimensions when available. JINYU, Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司), can review the model shortlist against that site brief. Update the bay calculation if the offered model changes; a depth balance describes the recorded body and the particular drawing, not every cabinet in a family.

Send the model shortlist and bay survey →