Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

Eight models · four cabinet families

Three-Shelf Cake Display Size Comparison: CK3, R3, RK3 and RX3

Compare recorded display fridge sizes, front-glass profiles and capacities before planning a three-shelf cake assortment.

Compare all eight models →
JINYU GN-1000RK3 straight glass cake display with three raised shelves and a lower deck
JINYU GN-1000RK3 · straight-glass three-shelf display

Three-shelf display fridge dimensions and specifications

Recorded model specifications; dimensions are width × depth × height in mm. Floor areas are calculated from the exterior cabinet outline.
JINYU modelFront and side glassW × D × H (mm)CapacityExterior footprint (m2)Rated powerShelvesService access
GN-1000CK3Curved front glass with glass sides1000 × 740 × 1300 mm385 L0.740470 W3 glass shelves2 sliding doors on the service side
GN-1200CK3Curved front glass with glass sides1200 × 740 × 1300 mm400 L0.888515 W3 glass shelves2 sliding doors on the service side
GN-1500CK3Curved front glass with glass sides1500 × 740 × 1300 mm460 L1.110530 W3 glass shelves2 sliding doors on the service side
GN-1800R3Straight glass front and sides1800 × 730 × 1300 mm715 L1.314640 W3 glass shelves2 sliding doors on the service side
GN-1200R3———0.000———
GN-900R3———0.000———
GN-1000RK3Straight glass front and sides1000 × 740 × 1300 mm525 L0.740470 W3 glass shelves2 sliding doors on the service side
GN-1200RK3Straight glass front and sides1200 × 740 × 1300 mm545 L0.888515 W3 glass shelves2 sliding doors on the service side
GN-1800RK3Straight glass front and sides1800 × 740 × 1300 mm735 L1.332675 W3 glass shelves2 sliding doors on the service side
GN-1000RX3Diagonal front glass with glass sides1000 × 730 × 1300 mm330 L0.730470 W3 glass shelves2 sliding doors on the service side

All eight records list freestanding installation, fan cooling, R290 refrigerant, 2-8°C and 220-240V/50Hz. Exterior footprints exclude installation clearances and circulation space.

Which three-shelf cake display sizes can I compare?

This comparison brings together eight JINYU freestanding cake displays from four families: CK3, R3, RK3 and RX3. All eight record three glass shelves, two sliding doors on the service side, fan cooling and a 1300 mm overall height. Their listed widths range from 1000 to 1800 mm. The table links each full model code to its specifications and photographs, keeping different cabinet designs visible beside their dimensions.

Start with the front-glass profile and the room position. CK3 records curved front glass, R3 and RK3 record straight front glass, and RX3 records diagonal front glass. These profiles can change how the assortment appears from the customer side. Compare the actual model photographs and shelf drawings alongside the outside size; a shared shelf count does not establish interchangeable display space.

Do equal outside dimensions mean equal display capacity?

GN-1000CK3 and GN-1000RK3 both measure 1000 × 740 × 1300 mm. Their recorded capacities differ: 385 L for CK3 and 525 L for RK3. Both record 470 W rated power and three glass shelves. At 1200 mm width, the CK3 and RK3 cabinets again share 740 mm depth and 1300 mm height, while listing 400 L and 545 L respectively. Each of those two models records 515 W.

Keep the capacity column attached to the complete model identity. These figures do not establish a number of cake boards or trays. Request usable shelf width and depth, vertical clearance and the loading opening for the exact cabinet. A comparison of outside dimensions alone cannot explain the internal volume measurement or prove that a particular decorated cake fits.

How much floor space do the cabinet outlines occupy?

Multiply the published width by depth to draw the cabinet rectangle. A 1000 × 740 mm cabinet occupies 0.740 square metres; a 1200 × 740 mm cabinet occupies 0.888 square metres. The difference is 0.148 square metres and 200 mm of frontage. These are calculated exterior footprints, before any installation clearance, staff standing position or customer circulation space is added.

Use those rectangles on a measured plan rather than treating them as complete installation allowances. Label the customer-facing glass and staff-facing sliding doors. Place the packing surface and route from reserve stock beside the drawing. Request model-specific installation instructions separately, and retain the dimensions from those documents when developing the final furniture and electrical layout.

What changes between the two 1800 mm straight-glass cabinets?

GN-1800R3 measures 1800 × 730 × 1300 mm, records 715 L capacity and lists 640 W. GN-1800RK3 measures 1800 × 740 × 1300 mm, records 735 L and lists 675 W. RK3 is therefore 10 mm deeper, with 20 L more listed capacity and a 35 W higher power rating. Both have straight front and side glass, three glass shelves and two service-side sliding doors.

Their calculated exterior footprints are 1.314 and 1.332 square metres. The difference is 0.018 square metres. Keep these measurements beside the model photographs and shelf drawings when comparing the cabinets. Rated power is an electrical specification; subtracting the two wattage figures does not establish daily energy use, operating cost or an energy-saving percentage.

Where does the diagonal-glass RX3 fit in the shortlist?

GN-1000RX3 measures 1000 × 730 × 1300 mm and lists 330 L capacity with 470 W rated power. It has diagonal front glass with glass sides. Compared with the 1000 mm CK3 and RK3 cabinets, RX3 retains the same width and overall height but is 10 mm shallower. Its calculated exterior footprint is 0.730 square metres, compared with 0.740 square metres for either 740 mm-deep cabinet.

Use RX3 as a separate glass-profile option on the same frontage drawing. Do not infer shelf depth from the 10 mm outside-depth difference. Request a dimensioned shelf layout and inspect how the proposed cake boards sit behind the front glass. Mark the viewing position on the customer side and the tray-loading position on the service side for the same assortment.

How should cake boards and trays be compared across three shelves?

Prepare one assortment sheet with the outside width, depth and finished height of each tray or cake board. Include raised decoration and the handling space needed to lift or slide it out. Give each item an identifier, then propose its shelf position on a drawing. Keep the three glass shelves and any other proposed display position clearly identified rather than estimating total cake capacity from cabinet litres.

Ask for usable shelf measurements and the service-door opening against each shortlisted model. Compare the same assortment in every proposed layout. Photograph the tray or board with a ruler when its shape is irregular. Retain the returned shelf drawing and sample arrangement with the model code so an attractive display photograph cannot be mistaken for a verified fit of your own products.

Which refrigeration and electrical details belong in the comparison?

All eight records list a 2-8°C temperature range, fan cooling, R290 refrigerant and a 220-240V/50Hz supply. The rated powers in the table range from 470 to 675 W. Keep those figures as model specifications. The table does not provide measured energy consumption, ambient operating limits or the temperature of a particular food item during service.

Send the destination electrical supply with the selected model codes and request the corresponding electrical and installation documents. Keep the supply description, connection location and cabinet layout on the same inquiry revision. If an offered configuration differs from the recorded model, compare its returned specification separately so the published dimensions and ratings are not silently carried into a different configuration.

What should I send with a three-shelf display inquiry?

Send the shortlisted model codes, measured floor plan, cake-board and tray dimensions, proposed assortment, destination and site electrical supply. Include the receiving-route measurements separately from the final installation plan. The table describes unpacked cabinet outlines; it does not state packed shipping dimensions. Request packing details for the selected configuration before assessing doorways, turns or lifting arrangements.

Use the JINYU inquiry form to send the brief to Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司). Keep the chosen model, returned shelf drawing and installation document revision together. The linked model pages retain the individual specifications and photographs behind this comparison. A change in width, glass profile or cabinet family belongs on the comparison sheet before the layout is accepted.

Send the selected model codes and layout →