Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

Five models · Three glass shelves

Three-Shelf Display Fridge Sizes: 1000 to 1800 mm Compared

Compare five JINYU CK3, RD3 and R3 cake displays: 1000-1800 mm widths, 730/740 mm depths, 1300 mm height, listed capacities and service-side access.

Compare cabinet sizes →
JINYU GN-1000CK3 curved glass cake display · 3 shelves in a cafe or bakery
JINYU GN-1000CK3 · 1000 × 740 × 1300 mm · 385 L

Three-shelf cabinet specifications

Recorded cabinet body dimensions; calculated footprint excludes installation space.
JINYU modelW × D × H (mm)Listed capacityBody footprint (m2)GlassShelvesRated power
GN-1000CK31000 × 740 × 1300385 L0.740Curved front glass with glass sides3 glass shelves470 W
GN-1200CK31200 × 740 × 1300400 L0.888Curved front glass with glass sides3 glass shelves515 W
GN-1200RD31200 × 730 × 1300650 L0.876Flat glass front, sides and top3 glass shelves450 W
GN-1500CK31500 × 740 × 1300460 L1.110Curved front glass with glass sides3 glass shelves530 W
GN-1800R31800 × 730 × 1300715 L1.314Straight glass front and sides3 glass shelves640 W

Worked 2000 mm frontage shortlist

Illustrative bay frontage only. Remaining width = 2000 mm minus cabinet body width; installation clearances come from the selected configuration's documents.

ModelBay frontage (mm)Body width (mm)Remaining width (mm)Listed capacity
GN-1000CK3200010001000385 L
GN-1200CK320001200800400 L
GN-1200RD320001200800650 L
GN-1500CK320001500500460 L
GN-1800R320001800200715 L

Buyer drawing and document worksheet

ReviewBuyer informationDocument connection
Site rectangleAvailable frontage, depth and overhead restrictionsDimensioned plan with customer and service sides
AssortmentCake, board, stand and cover dimensionsItem identifiers and requested shelf positions
Returned cabinet drawingUsable shelf dimensions and clear door openingExact model code and drawing revision
InstallationSpecified spacing, staff access and service accessReturned model-specific instructions
ElectricalSite supply and offered configurationModel-specific electrical documents
ReceivingAccess route and actual cargo dimensionsShipment-specific package schedule

Which display fridge sizes have three glass shelves?

The five freestanding cabinets in this comparison all record three glass shelves and a 1300 mm overall height. CK3 provides three widths: GN-1000CK3 at 1000 mm, GN-1200CK3 at 1200 mm and GN-1500CK3 at 1500 mm. Each is 740 mm deep. GN-1200RD3 measures 1200 × 730 × 1300 mm, while GN-1800R3 measures 1800 × 730 × 1300 mm. Read the dimensions throughout this page as width × depth × height.

Start by marking the available frontage and depth on the shop plan. A requirement for three shelves leaves several cabinet sizes to consider; it does not identify one footprint. Keep the exact model beside each proposed position. Use the table to distinguish the cabinet body, listed capacity and glass description before requesting the drawings for a smaller shortlist.

How do the 1000, 1200 and 1500 mm CK3 cabinets compare?

Within CK3, increasing width from 1000 to 1200 mm adds 200 mm of frontage. Listed capacity changes from 385 L to 400 L, a 15 L difference. Increasing width again to 1500 mm adds 300 mm of frontage and changes listed capacity to 460 L, another 60 L. The recorded depth, height and three-glass-shelf arrangement remain the same across these three models.

Their calculated cabinet footprints are 0.740, 0.888 and 1.110 square metres respectively. These are width multiplied by depth, with millimetres converted to metres. Draw those rectangles beside the serving counter and mark where staff load the display. The capacity increments differ between the width steps, so a proportional estimate based on width would misstate the recorded litres. Request the usable shelf measurements for each model under consideration.

What differs between the two 1200 mm cabinets?

GN-1200CK3 and GN-1200RD3 have the same recorded width and height: 1200 mm and 1300 mm. CK3 is 740 mm deep and lists 400 L; RD3 is 730 mm deep and lists 650 L. Their body footprints are 0.888 and 0.876 square metres. The 10 mm depth difference and the 250 L capacity difference describe separate entries in the model records.

CK3 records curved front glass with glass sides. RD3 records flat glass at the front, sides and top. Both record two sliding doors on the service side. Compare the customer-facing elevation and the returned interior drawings for the same cake assortment. The source records do not explain the capacity measurement methods, so the listed litre difference cannot establish extra usable shelf area or a particular increase in cake count.

When should the 1800 mm R3 enter the shortlist?

GN-1800R3 provides the widest cabinet body in this group, at 1800 × 730 × 1300 mm, with 715 L listed capacity and three glass shelves. Relative to GN-1500CK3, it adds 300 mm of frontage, reduces body depth by 10 mm and adds 255 L of listed capacity. It records straight glass at the front and sides and two service-side sliding doors.

For an illustrative 2000 mm furniture run, subtracting the body width leaves 200 mm beside R3, compared with 500 mm beside GN-1500CK3. This is a frontage calculation before installation spacing or adjoining fixtures. Mark the actual end walls, packing surface and staff approach before allocating the remainder. Ask for the installation drawing and service access requirements against the exact cabinet offered.

Does a three-shelf count establish how many cakes will fit?

A shelf count identifies the recorded arrangement. It supplies no usable shelf width, shelf depth, vertical clearance or loading limit. Make an assortment sheet listing each cake with its board, stand, cover and any projecting decoration. Record the complete outside width, depth and height of that assembly. Give whole cakes and individual portions their own item identifiers.

Send the same assortment sheet for each shortlisted model. Ask for a shelf drawing showing the proposed positions, usable dimensions and loading instructions. Add the clear service-door opening and the path used to insert and remove each assembly. Keep displayed quantity separate from reserve stock. This connects the size comparison to the products staff actually handle without turning the 385-715 L figures into unverified serving quantities.

Which electrical and access details belong beside the size comparison?

All five recorded models list a 220-240V/50Hz supply. Rated power is 470 W for GN-1000CK3, 515 W for GN-1200CK3, 450 W for GN-1200RD3, 530 W for GN-1500CK3 and 640 W for GN-1800R3. Retain those entries with the complete model codes in the equipment schedule. Rated watts alone do not provide daily energy consumption or the connection arrangement for a particular premises.

The service-side sliding doors give the floor plan a staff-facing side as well as a customer-facing side. Show both, including the nearby packing bench and route from reserve storage. Request the model-specific electrical and installation documents for the offered configuration. Keep receiving-route measurements and shipment-specific packed dimensions in the transport review rather than substituting the cabinet-body dimensions for the cargo outline.

What should a three-shelf display fridge inquiry include?

Send the measured frontage, depth and overhead restrictions, the proposed cabinet position and the exact shortlisted codes. Attach the assortment sheet and indicate which side staff will use. For a 1200 mm position, identify whether you want responses for CK3, RD3 or both; the width alone does not identify the glass format, listed capacity or rated power.

Use one comparison row per model and retain the returned drawing revision, usable shelf measurements, installation space and electrical configuration beside it. Send the equipment inquiry to Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司). If the layout changes, revise the measured site drawing and ask for a response against that revision. Keep the selected cabinet and the documents used to assess it together for the counter designer and receiving team.

Send your cabinet shortlist and assortment →