Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

Are these models suitable for commercial kitchens and restaurants?

The linked models cover specific restaurant display tasks. GN-900RT is a countertop cake display; JY-LC-318 is an upright beverage display cooler. Choose between those roles before comparing cabinet size. A restaurant may need both, at different positions and with different contents. Describe what each unit will hold and how staff will use it. That gives the equipment contact a basis for reviewing your application, rather than treating every cabinet as interchangeable kitchen storage.

For a dessert counter, GN-900RT lists 140 L, two shelves and rear sliding doors in a body measuring 900 x 530 x 730 mm, width x depth x height. Its recorded temperature range is 2-8 degrees C. Compare that range with the holding requirements of your desserts. Send the size of the largest cake board or tray and its loaded height, then request usable shelf and access-opening dimensions. Cabinet volume alone does not tell you how many portions fit or how quickly staff can serve them.

For packaged drinks, JY-LC-318 lists 270 L and one glass door. Its body measures 555 x 550 x 1900 mm, width x depth x height, and the recorded temperature range is 0-10 degrees C. Sketch the bottle or can arrangement and the space used when staff replenish the shelves. Ask for shelf measurements and loading information for the offered version. If your intended contents are ingredients or prepared meals, state that separately and request an equipment recommendation for that use.

Give the equipment contact a service description as well as a menu. Include daily opening hours, the busiest period, the quantity replenished at once and the temperature of products when loaded. Explain how often staff expect to open the doors. Request operating documentation that addresses the proposed load and working conditions. Neither the capacity figure nor the published temperature range establishes a continuous-duty rating, a pull-down time or performance at your particular peak workload.

Position matters in a working kitchen. Mark nearby cooking equipment, air outlets, staff routes and the electrical connection point on your layout. For GN-900RT, show the counter and rear serving access, and request cabinet weight and support requirements. For JY-LC-318, include the space for the glass door to open. Ask for the permitted ambient conditions, ventilation clearances and electrical specification for each offered configuration. Compare those documents with the site measurements; body dimensions alone leave these installation questions unanswered.

Use the inquiry entry below to send your model choices, quantities, destination and intended service. Request the operating and cleaning instructions with the configuration offered. If your project specifies a certification or other acceptance requirement, name it and request the corresponding model-specific documents. Keep the reply beside each model in the equipment schedule so the installation and operating teams receive the same information. List unresolved requirements against the relevant cabinet rather than accepting a general statement about the whole range.

Prepare this information

  • Assigned task and food or drink contents for each cabinet
  • Model code, offered configuration, quantity and destination
  • Required holding conditions compared with the model temperature range
  • Cake board, loaded tray, bottle or can measurements
  • Usable shelf dimensions, access opening and proposed loading arrangement
  • Opening hours, peak service period and expected door-opening frequency
  • Replenishment quantity and product temperature at loading
  • Site drawing with counter support, nearby equipment and door or rear access
  • Documented ambient conditions, clearances, electrical details and loading requirements
  • Operating instructions, cleaning instructions and responses to project-specific requirements

Compare RT countertop cake display models

Matching model records

Discuss your site and product arrangement

Send your equipment brief