Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

Can the casters be removed for commercial kitchen equipment?

The linked model records do not say whether casters are included or removable. Ask which base comes with the exact cabinet you intend to order. Explain why you want the change, such as a lower display height or a fixed position beside a counter. Request the proposed base arrangement and its installed dimensions. For equipment already on site, include the model code and a photograph of its identification label so the reply refers to that unit.

GN-1500LG is a freestanding open-front deli chiller with recorded dimensions of 1500 x 740 x 1350 mm. JY-LC-318 is a beverage cooler with one glass door and recorded dimensions of 555 x 550 x 1900 mm. The dimensions for both models are width x depth x height. Neither record gives the caster height or dimensions for an alternative base. Use these figures to compare the cabinets with your space, then request a dimensioned drawing for the base being offered. There is no documented height reduction to subtract from either listed height.

Ask for a drawing that identifies the support positions and attachment points beneath the selected cabinet. Ask whether the offered base includes wheels, fixed feet or another arrangement. If replacement supports are proposed, request their part details and the installation instructions for that cabinet. Describe what the cabinet will hold and the expected load when asking about the proposed supports. A wheel visible in a product photograph does not establish how it is attached or what can replace it.

Mark the finished floor level, counter edge and overhead opening on a site sketch. Request the overall height with the proposed supports fitted, including any adjustment range that applies. Measure the delivery route separately and request the packed dimensions. Explain whether you need to pass the cabinet through a low doorway or reduce its height in the final position.

Ask how the proposed base affects access beneath and around the cabinet. Show nearby counters, cabinets and equipment, and request the applicable ventilation and service clearances. For GN-1500LG, include access around its open-front display in the layout. For JY-LC-318, show the space needed to open its glass door and restock it. Ask how the cabinet would be cleaned and moved for service with the proposed supports. Those details belong on the installation drawing alongside the overall dimensions.

Include the model links, quantity, destination and target height in your equipment inquiry. Attach your site sketch and any photographs of an existing unit. Request a written reply that identifies the supplied base, the proposed change, the resulting dimensions and the applicable instructions. If work after delivery is proposed, ask who will carry it out and which parts are supplied. Keep that reply with the order drawing so the receiving team can compare the delivered configuration with the agreed drawing.

Prepare this information

  • Model code and photograph of the identification label for equipment already on site
  • Quantity, destination and reason for requesting a base change
  • Supplied base and whether the offered configuration includes casters
  • Base drawing with support positions and attachment points
  • Proposed replacement supports and matching part details
  • Intended contents and expected load for the proposed supports
  • Installed height and any applicable support adjustment range
  • Finished floor level, counter height, overhead opening and separate delivery-route measurements
  • Ventilation, door opening, cleaning and service access on the site sketch
  • Written configuration, applicable instructions, supplied parts and work responsibilities

Compare freestanding open-front deli chiller records

Matching model records

Discuss your site and product arrangement

Send your equipment brief