JINYU · Buyer question
Can the doors/hinges be configured to open on either side for commercial kitchen equipment?
The published records do not confirm a choice of hinge side or a door that can be reversed on site. Ask about these options for the particular cabinet being offered. Ordering a cabinet with a specified hinge position is different from changing that position after delivery. State which arrangement you need and request the corresponding configuration drawing. A photograph of a similar cabinet does not establish the door options for your order.
For JY-LC-318, the current specification lists one glass door and body dimensions of 555 x 550 x 1900 mm, width x depth x height. It does not state the hinge side or whether the door is reversible. Describe your preferred position while standing outside the cabinet, facing its closed glass door. Mark the hinge edge and handle edge on a front view. On a plan view, add an arrow showing the opening movement. This gives the supplier a specific arrangement to assess instead of the ambiguous request "opens left".
GN-900RT uses two rear sliding doors. The countertop cake display measures 900 x 530 x 730 mm, width x depth x height. Its recorded access has sliding panels rather than a side-hinged door, so a left-hinge request does not match that configuration. Label the customer side and staff side on your counter plan. Request the clear loading opening and panel travel for the offered unit, then compare those measurements with the trays staff will put through the rear.
For any proposed hinged configuration, show the cabinet beside the wall, counter end and neighbouring equipment. Ask for dimensions with the door open, including the handle projection and opening angle needed to load the cabinet or withdraw its shelves. Draw that space on the same plan as the staff aisle and restocking position. The closed cabinet width and depth do not describe an open door. Include bottle crates or loaded trays in the layout so the review covers the way staff actually replenish it.
Keep routine loading space and maintenance access visible on the drawing. Behind a GN-900RT, mark the staff position and the counter equipment around its rear doors. Beside a JY-LC-318, mark anything that might obstruct the proposed door movement. Ask for the installation and service clearances in the documentation for the offered unit. Use those measurements alongside the opening drawing; the door description alone gives no clearance value.
Include the annotated drawing, model codes, quantities and destination in your inquiry. Identify the requested hinge edge using the viewing direction above, or specify rear sliding access for the recorded GN-900RT arrangement. Request a written description of the doors supplied with each order line. If a change after delivery is proposed, ask whether it is supported for that unit and request the parts, instructions and work responsibilities. Keep the agreed drawing with the order records for comparison when the equipment arrives.
Prepare this information
- Model code, quantity, destination and configuration offered
- Recorded door type for each selected cabinet
- Viewing direction used to define left and right
- Front view with the requested hinge and handle edges
- Plan view with the opening arrow, walls and adjacent equipment
- Open-door dimensions, handle projection and access angle requested
- Loading opening compared with bottles, trays and shelf removal
- Staff aisle, replenishment position and rear counter access
- Documented installation and maintenance clearances
- Written supplied arrangement and details of any supported door reversal
Compare countertop cake displays with rear sliding doors