Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

Do listed dimensions, such as height, include casters or other pre-installed components for commercial kitchen equipment?

Check the dimensioned drawing for the configuration being offered. The two linked model records give overall dimensions, but neither says whether the stated height includes casters or feet. Ask the equipment contact to identify the base used for the measurement and the highest fitted point. A written answer tied to the model and drawing gives your site team a usable height for planning the installation.

GN-1500LG is listed at 1500 x 740 x 1350 mm, and JY-LC-318 at 555 x 550 x 1900 mm. Both sets of figures are width x depth x height. Record those published figures beside the model codes, then ask whether they describe the fully assembled unit in your offer. Adding a guessed caster height could count the same part twice. Subtracting a guessed height could leave you planning for a cabinet that is too tall for the opening.

Have the offer describe the supplied base. If it includes casters, ask whether the drawing includes them and whether they arrive fitted. For a version with adjustable feet, request the adjustment range and the setting used for the stated overall height. A change of base needs a corresponding assembled dimension. Keep the revised drawing with the revised offer so your receiving team knows which arrangement to expect.

Look beyond the base when checking the full footprint. Ask the drawing to identify any handles, rear projections or upper fittings supplied with the selected configuration. Then request the space needed for operation and service separately. GN-1500LG has an open front with no door. JY-LC-318 lists one glass door, so its closed dimensions alone do not describe the space needed to open that door. Neither overall-size entry supplies installation clearances.

Measure the opening at the intended position, including any shelf or sign above it. Record the narrowest doorway and overhead obstruction along the delivery route as well. Request packed dimensions for any part of the route the cabinet will travel in its packaging. Keep packed size, assembled size and documented installation clearances distinct on your layout. If the route appears to require removal of a component, ask whether that is supported for the offered unit and obtain its handling instructions.

Send the model codes, quantities, intended base arrangement and measured openings through the inquiry entry below. Ask how to share your marked layout and request a drawing with a date or revision reference. Give the agreed version to the people receiving and positioning the equipment. At arrival, compare the fitted parts and assembled dimensions with that drawing. If the supplied arrangement differs, photograph the difference and send it with the order reference for review.

Prepare this information

  • Model code and quantity beside each offered configuration
  • Published width, depth and height with units in the same order
  • Written identification of the base included in the height measurement
  • Drawing of the assembled unit from the floor to its highest fitted point
  • Supplied casters or feet and their fitted or separately packed condition
  • Adjustment range and measurement setting if adjustable feet are offered
  • Any fitted projections shown on the drawing for the selected version
  • Separate door-opening, operating and service-space requirements
  • Measured site openings and delivery route compared with assembled and packed sizes
  • Agreed drawing date or revision for the receiving team to check at arrival

Compare open-front deli chiller models

Matching model records

Discuss your site and product arrangement

Send your equipment brief