JINYU · Buyer question
How do I measure counter space for an open cake box beside a display?
Put the actual flat box blank on the proposed packing surface and assemble it there. Mark the furthest reach of the lid, side flaps and the hands holding them. Then repeat with the box ready to receive the cake board. Record these outlines separately from the footprint of the closed box; the largest occupied area may occur before the cake enters it.
Show the display serving opening, counter edge and nearby till on the same plan. Walk through loading the box and closing its lid while leaving room for the board to remain level. Photograph any flap that drops over an edge or reaches into another working position. Try the largest box used in the menu as well as a smaller box with a different folding pattern.
Attach the marked plan and box references to the GN-1200R2 inquiry when reviewing the cabinet position. Request the service-opening drawing for the offered configuration and place it beside the packing outlines. Keep the usable packing surface and the cabinet installation spaces separately labelled. The resulting plan should show where the box opens, receives the board and closes without making an equipment dimension stand in for a packing-area measurement.
Prepare this information
- Flat blank and open-lid outlines
- Loading and closure positions marked
- Largest and differently folded boxes tried
Review the straight-glass cake display series