Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

How do I measure sightlines across a cake display from the service side?

Use a side-section drawing through the actual staff position, support counter and cabinet. Mark the server's viewing point and the product or customer feature that must remain visible. A cabinet height measured from the support surface does not describe the total obstruction above the floor.

GN-660RT and GN-1200RT each have a recorded body height of 730 mm. Add the measured support height to draw the top of the cabinet, then show overhead signs, shelf edges and the till screen. Keep the support height labelled as a site measurement so it is not mistaken for part of the appliance specification.

Test the drawing with a temporary full-size outline on the counter. View it from the normal serving and payment positions, including where staff move to open the display. Note whether seeing the customer requires a step sideways or a different display position. Keep photographs from those positions and mark the selected location on the layout. Repeat the check if the supporting furniture or model height changes.

Prepare this information

  • Staff viewing point and customer approach
  • Floor-to-counter measurement plus cabinet body
  • Photographs from serving and payment positions

Detailed worksheet and purchasing guide

Matching model records

Discuss your site and product arrangement

Send your equipment brief