JINYU · Buyer question
How do I record cake board overhang when planning a display shelf?
Record the cake outline and the board outline separately. Include projecting tabs, decorative edges, ribbons and any stand beneath the board. On a plan view, mark how far each edge of the board extends beyond the cake. If an irregular board is used, trace the actual perimeter rather than representing it only by the cake diameter or the board's longest dimension.
Place that complete outline on the proposed shelf drawing. Mark the supporting shelf boundary, nearby boards, label holders and the edge beside the access opening. Ask for the shelf and opening measurements for the exact cabinet configuration where these are absent. Keep the desired display position separate from a position tested with the actual board; neither an attractive photograph nor the cabinet's overall depth records that distinction.
Document how staff lift and turn the board during insertion and removal. Photograph the board from above with its measuring points visible, then include the side view if the stand changes its height. Send the traced outline and marked shelf plan through the inquiry entry with the GN-1200R2 reference. Record any proposed board change as a separate menu presentation revision.
Prepare this information
- Cake, board and stand measured separately
- Projecting edges against shelf support
- Insertion and removal sequence
Review the straight glass cake display series