JINYU · Buyer question
How do I test adjacent sections of a divided tote pocket together?
Label the sample pocket sections A, B and C on an inside photograph, using only the labels needed for that design. Assign an intended object to each section and identify its case or packaging. First insert and remove each object with the neighbouring sections empty. Record which end enters first and whether the opening needs to be held apart. These observations provide a separate reference for each section before the combined arrangement is tried.
Fill the sections together and repeat the same movements one object at a time. Observe whether a neighbouring object presses against the divider, covers an opening or moves when another item is removed. Keep the position of the tote and the main contents unchanged between the individual and combined trials. Photograph the pocket from above as well as from the side where the divider movement is visible. State which object remains in place at each step.
If a section becomes difficult to use, connect the observation to the corresponding divider label on the drawing. Send the sequence through the canvas tote inquiry and ask which proposed change addresses that interaction. Moving a divider also changes the neighbouring section, so include both affected objects in the revised trial. Retain the original arrangement in the comparison sheet. Do not infer that every combination of objects will fit from a result obtained with only one selected set.
Prepare this information
- Sections and contents mapped
- Individual and combined trials compared
- Both sides of a proposed divider change retested