Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

What should I measure for a refrigerated rail behind a sushi service counter?

Measure the full service-counter run from the staff side, recording usable top depth, counter height and every interruption such as a sink, column or payment station. Add the intended rail rectangle and the space for boards, plates and utensil storage as distinct outlines. The countertop frontage alone does not describe the working station.

GN-1655SC has a recorded body of 1655 × 405 × 280 mm. GN-1655SB uses the same width and depth with a 450 mm body height. Place both outlines on a section through the actual counter. Request the selected model's access and installation drawing before fixing shelves or finishes around it.

Measure from the normal staff position to the intended ingredient locations using representative containers and boards. Include the movement needed to lift out a pan, rather than checking hand reach only to its front edge. Send the dimensioned plan, side section and photographs in the inquiry. Identify any existing counter features that cannot move, so the proposal is assessed against the actual restrictions of the sushi service area.

Prepare this information

  • Counter plan and side section
  • Measured board and pan positions
  • Fixed site restrictions

Review the matching cabinet series

Matching model records

Discuss your site and product arrangement

Send your equipment brief