Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Buyer question

What should I measure under hanging shelves before ordering a countertop display?

Measure from the proposed supporting surface to the underside of each hanging shelf, light fitting and bracket above the display. Record the lowest point across the complete cabinet footprint; a single measurement at the middle can miss a projecting bracket or a sloping boundary. Show the measurement locations on a front and side sketch.

The recorded GN-900RT cabinet body is 900 × 530 × 730 mm. Subtracting its body height from an overhead measurement gives only a geometric remainder. It does not establish installation clearance or space for cleaning and service. Request those requirements for the offered model before approving the position.

Include items normally stored on the hanging shelf and any cables or lighting tracks below it. Check how the cabinet will be placed on the counter and removed later, since an overhead shelf may affect that movement. If a fitting or shelf is to be relocated, put the revised position on the same drawing. Send the lowest measured height and the obstruction pictures with the model inquiry.

Prepare this information

  • Lowest underside height at marked positions
  • Brackets, lights and projecting stored items
  • Placement and future removal route

Detailed worksheet and purchasing guide

Matching model records

Discuss your site and product arrangement

Send your equipment brief