Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

Buyer planning guide

Display Fridge Size for Multiple Cafes: Counter-by-Counter Matrix

Match three real JINYU RT display fridge sizes to three example cafe counters, compare nine width balances and turn each selected position into a model quantity schedule.

JINYU GN-1200RT straight glass countertop cake display

Three counters × three cabinet widths

Site frontages are illustrative buyer measurements. Cabinet dimensions come from the linked model records. Width balance = site frontage minus cabinet width, before allocating installation space.

Nine exterior-width comparisons; positive balances are unallocated frontage
Example siteCounter frontage (mm)JINYU modelCabinet W × D × H (mm)Listed capacityWidth balance (mm)Exterior width result
A800GN-660RT660 × 530 × 730102 L+140140 mm left to allocate
A800GN-900RT900 × 530 × 730140 L-100Exceeds frontage by 100 mm
A800GN-1200RT1200 × 530 × 730190 L-400Exceeds frontage by 400 mm
B1000GN-660RT660 × 530 × 730102 L+340340 mm left to allocate
B1000GN-900RT900 × 530 × 730140 L+100100 mm left to allocate
B1000GN-1200RT1200 × 530 × 730190 L-200Exceeds frontage by 200 mm
C1300GN-660RT660 × 530 × 730102 L+640640 mm left to allocate
C1300GN-900RT900 × 530 × 730140 L+400400 mm left to allocate
C1300GN-1200RT1200 × 530 × 730190 L+100100 mm left to allocate

From site positions to purchasing lines

Two example selections; one equipment unit at each site
SelectionSiteSelected modelUnitsUnallocated width (mm)Per-unit rated power
Mixed modelsAGN-660RT1140250 W
Mixed modelsBGN-900RT1100350 W
Mixed modelsCGN-1200RT1100360 W
Common modelAGN-660RT1140250 W
Common modelBGN-660RT1340250 W
Common modelCGN-660RT1640250 W

Mixed-model purchasing lines: GN-660RT × 1; GN-900RT × 1; GN-1200RT × 1. Common-model purchasing line: GN-660RT × 3. Keep sites A, B and C on the allocation register in both cases.

Site record fields: site and position code; measurement date; counter W × D × H; plan revision; selected model; units; intended assortment; equipment drawing reference; counter support review; electrical document reference.

Send the site matrix and selected equipment quantities →

How do I choose display fridge sizes for several cafe sites?

Give every intended display position its own site code and measured counter record, then compare the same model shortlist against each position. Keep width, depth and height in separate fields. A model that fits the frontage at one cafe can exceed the available width at another, even when both sites use the same furniture style. Write the cabinet model beside the site measurement rather than selecting one chain-wide size from a photograph.

The worked matrix below compares JINYU GN-660RT, GN-900RT and GN-1200RT with three illustrative counter widths: 800, 1000 and 1300 mm. These site values are examples, not standard counter dimensions. All three cabinets are 530 mm deep and 730 mm high. The exercise screens the exterior width first; the selected configuration drawing, counter construction and working layout supply the remaining installation information.

Which published dimensions belong in the site-by-model matrix?

GN-660RT measures 660 × 530 × 730 mm and lists 102 L capacity. GN-900RT measures 900 × 530 × 730 mm and lists 140 L. GN-1200RT measures 1200 × 530 × 730 mm and lists 190 L. The order here is width × depth × height. Keep the complete model code on each column so the 900 mm cabinet is not confused with another family having a different depth.

Use the outside dimensions to draw the body rectangle at each site. Obtain shelf dimensions separately for the intended trays, stands and packaged desserts. Listed litres describe each cabinet record; they do not establish the number of sale units that a site can display. Attach the local assortment to the site row so two cafes choosing the same cabinet can still request different shelf-layout reviews.

How should I interpret a positive or negative width balance?

Subtract cabinet width from the measured counter frontage. At site A, an illustrative 800 mm position leaves 140 mm beside GN-660RT, while GN-900RT exceeds that frontage by 100 mm and GN-1200RT exceeds it by 400 mm. Preserve negative results in the comparison: they identify a body outline that cannot sit wholly within the recorded frontage.

A positive balance describes the unallocated width only. At site B, a 1000 mm frontage leaves 100 mm beside GN-900RT. That number has not yet been assigned to side clearances, adjacent fittings or a working surface. Keep the installation drawing and the measured counter edges beside the calculation. If the site measurement changes, update the whole site row so every candidate is compared with the same revision.

Should each cafe use its largest candidate or one common model?

Compare the two purchasing approaches explicitly. A worked mixed selection assigns GN-660RT to A, GN-900RT to B and GN-1200RT to C. Its remaining frontage is 140, 100 and 100 mm respectively. This selection creates three model lines, each with quantity one. It is a width-based example rather than a completed equipment specification; shelf use and site services still need their own records.

A common-model alternative assigns GN-660RT to all three sites. It creates one model line with quantity three and leaves 140, 340 and 640 mm of frontage at A, B and C. Sites B and C then have the 102 L cabinet instead of the mixed selection's 140 L and 190 L cabinets. Record that local change beside the assortment review. Standardising a model changes both the purchasing schedule and the display available at individual sites.

How do counter depth and height change the width shortlist?

Measure the actual supporting surface at each cafe and record any step, rear obstruction or counter edge shown in its construction drawing. The three RT cabinets share a 530 mm body depth. A site with enough frontage can still have a depth conflict. Keep the body outline and the supporting furniture outline visible as separate records, and request the base drawing and equipment weight for the counter review.

Each selected RT cabinet is 730 mm high above its support surface. For an illustrative 900 mm counter, its top is 900 + 730 = 1630 mm above the floor. A second site with an 850 mm counter places the same cabinet top at 1580 mm. Add the actual local counter height to the elevation instead of copying the first cafe's overall height into every site drawing.

How do I turn selected positions into an equipment quantity schedule?

Retain the site-position register, then group identical selected model codes to create the purchasing lines. For the mixed example, the three lines are one GN-660RT, one GN-900RT and one GN-1200RT. For the common-model alternative, the purchasing line is three GN-660RT units, linked back to sites A, B and C. Model quantities describe equipment units; package counts come from the shipment-specific packing schedule.

Attach the site supply record to each position. The three model records list 220-240V/50Hz, with rated powers of 250 W, 350 W and 360 W respectively. Keep those figures per unit in the electrical schedule and request the configuration documents for the selected equipment. A shared model code helps group purchasing lines, while each site's connection review remains attached to its own location.

What should I send JINYU with a multi-site display size inquiry?

Send the site-position register, measured width and depth, counter height, selected model codes and required equipment counts. Attach the dated plan for each cafe, the intended assortment and photographs labelled with the same site code. List the requested drawing references, shelf measurements, base information and electrical documents against the affected position so the response can address a specific site.

Address the inquiry to JINYU, Shaanxi Jinyu Kitchenware Co., Ltd. (陕西金宇厨具有限公司). Keep the chosen mixed or common-model schedule with its revision and return any alternative model against the site it changes. If site C moves to a different counter, retain the old measurement as a previous revision and recalculate its row. The resulting record connects the purchasing count to the physical location where each cabinet is intended to operate.

Reference sources

Regional references support general planning; model-specific specifications come from the published JINYU model tables.