Skip to content
JINYUCOMMERCIAL KITCHEN EQUIPMENT
Menu

JINYU · Planning guide

Topping station labels: readable names and pan-position maps

A topping station drawing shows where containers sit, but staff also need to associate each ingredient name with the right container. A label on the counter edge can become ambiguous when a wide pan is replaced by smaller ones. A readable name can disappear behind a utensil handle. Include the proposed labels in the layout review rather than adding them after the pan arrangement is accepted.

The four questions below cover reading labels from the working position, mapping mixed pan sizes, following a pan through a move and reviewing a revised equipment proposal. Use empty representative pans and paper labels during the layout trial. Record what each label identifies: a fixed position, a particular container or the proposed contents.

GN-1305SC and the topping fridge series are equipment references for the inquiry. Request the offered pan-layout and accessory drawings before selecting a label mounting arrangement. This guide supplies a layout method; it does not establish an included label holder, an attachment material or an ingredient-handling procedure.

Questions to resolve before ordering

Recorded cabinet dimensions

Cabinet body dimensions; installation space and interior fit require a separate review.
ModelWidth × depth × height
GN-1305SC1305 × 405 × 280 mm

Discuss your site and product arrangement

Send your equipment brief