JINYU · Buyer question
How do I map ingredient labels when a topping rail uses different pan sizes?
Draw the proposed rail from above and mark the staff side before assigning position references. Outline each pan at its outside rim and give every opening a unique reference. Use an inset or a second view where small pans share a larger opening. Put the ingredient names in a table beside those references so the drawing remains legible when a long name will not fit inside a small rectangle.
Distinguish the pan reference from the position reference. A container can leave the rail while the opening stays in place. Add the proposed pan size or sample identifier to the table so two small neighbouring containers are distinguishable even when their contents have similar names. If a front-edge label spans several openings, mark its intended association with a line or a repeated position reference. Ask someone who did not draw the plan to match the temporary labels to the empty pans.
Send the numbered plan and the offered configuration reference with the GN-1305SC inquiry. Request the pan and support arrangement that corresponds to that layout; a count of containers alone leaves their positions unresolved. Compare the returned drawing against the same numbering before revising the label table. Retain a dated copy with the counter plan. If the pan sizes change during offer review, update the outlines, support references and label associations together rather than carrying the old table onto a different arrangement.
Prepare this information
- Staff side marked on the plan
- Unique opening and pan references
- Label table matched to the returned arrangement
Review the topping fridge series