JINYU · Buyer question
How do I compare metric cabinet dimensions with a US floor plan drawn in inches?
Convert each cabinet dimension from millimetres to inches by dividing by 25.4, and retain the original metric figure beside the converted value. For GN-1200R2, the recorded 1200 × 730 × 1200 mm body becomes approximately 47.24 × 28.74 × 47.24 inches. Label the sequence width, depth and height so the converted values cannot be swapped on the plan.
Place the cabinet body on the drawing at its stated scale, then add installation allowances from the exact-model instructions as separate outlines. Do not round a cabinet dimension down to make a tight opening appear usable. A nominal counter bay and a measured finished opening may differ; identify which measurement the drawing shows before comparing them.
Use one unit system for the installation review and preserve the original supplier drawing for reference. Mark projecting handles, connections and opening movements when their dimensions are available. The converted body size does not establish the shipping package size or route clearance. Send any tight location as a dimensioned sketch with the model reference, including the actual finished surfaces and the direction of entry.
Prepare this information
- Original and converted dimensions
- Finished opening measurements
- Separate installation and route outlines
View the matching cabinet series